You searched for: Filters

Supplier: MACHEREY-NAGEL

MN 619 eh is slightly more dense than MN 619 with high particle retention and slow flow rate.

Supplier: Sartorius

Ready to use units which, attached to a membrane pump or tube pump, quickly and reliably sterilise 100 to 10000 ml of media and aqueous solutions.

Supplier: MACHEREY-NAGEL

These papers are made hydrophobic (impermeable to water) by impregnation with a silicone. With the aid of these filters, water can be separated from water-immiscible organic solvents in an elegant manner, by means of a simple filtration.

Supplier: Sartorius

These non woven grades are made of rayon. Ideal for the filtration or prefiltration of viscous solutions containing particles visible with the naked eye.

Supplier: Sartorius

Ready to use disposable capsules for sterile filtration in laboratory scale or for small scale filterability trials.

Supplier: MACHEREY-NAGEL

MN GF-4 is a binder-free glass fibre filter paper with good loading capacity and high flow rates.

Supplier: Whatman products (Cytiva)

MBS I is an excellent system for optimal microbiological control using membranes. The overall procedure time is reduced to a minimum. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to more reproducible results. All components are sold separately. The modular system provides flexibility to select the hardware and accessories that best suit the unique and varied workflows of the user.
The special sealing technique ensures easy handling and high integrity of the funnel and membrane during filtration. This keeps any cross-contamination to a minimum.

Supplier: Spectrum Laboratories

CultureGard® HF perfusion hollow fibre sterilising grade filter for cell culture perfusion. Made with 0,2 µm MWCO DynaFibre® membrane that permits the flow of culture medium while preventing the introduction of foreign microbials.

Supplier: MACHEREY-NAGEL

Wet-strengthened analytical filter papers are made of refined pulp and linters and feature a content of α-cellulose of more than 95%. The smooth surface of these papers allows fibre-free filtration.

Supplier: MACHEREY-NAGEL

This filter paper, which is dyed black with a sulphur dye, is used to identify small quantities of light precipitates. For example, it is used for the detection of fluorine or silicon.

Supplier: MACHEREY-NAGEL

MN GF-2 is a binder-free glass fiber filter paper with three times higher basis weight than MN GF-1. It combines fine particle retention with excellent loading capacity.

Supplier: Whatman products (Cytiva)

Pressure filtration devices with a sample loading cylinder are suitable for batch filtration of samples from 20 ml. Devices without infusion cylinders are connected inline and are suitable for larger volumes of several liters.

Supplier: Thermo Fisher Scientific

These syringe filters with PTFE membrane and PP housing are used for benchtop fermenters, in-line gas filtration for sterile air or CO₂ and to protect vacuum pumps from damage by aqueous solutions. They are also designed for filtration of aggressive chemicals and solvents such as those used in GC and HPLC.

Supplier: MACHEREY-NAGEL

MN GF-3 is slightly more retentive than MN GF-1. This binder-free glass fiber filter paper is used for the collection of suspended solids in potable water as well as natural and industrial waste water in many parts of the world.

Supplier: MACHEREY-NAGEL

These quantitative filter papers are made from refined pulp and linters. They are purified in a highly developed clean-up process to remove organic and inorganic impurities. This ensures a low ash content of <0,01 %. They are consistent performance and give safe results in gravimetric analyses.

Supplier: MACHEREY-NAGEL

MN GF-5 is a binder-free glass fibre filter paper with excellent retention of fine particles. It is often used in combination with membranes to protect the membrane from clogging.

Supplier: MACHEREY-NAGEL

Grade MN 651, creped.

Supplier: Bel-Art Products, a Part of SP

These HDPE sheets can be cut, sawed, formed, machined and welded to fabricate special items.

Supplier: MACHEREY-NAGEL

MN 616 md is slightly more retentive than MN 615 with a corresponding increase in filtration time.

Supplier: G-Biosciences

The 3 ml spin columns are designed to hold up to 3 ml of resin, leaving enough rome for a further 4 ml of buffer. The unique design allows the columns to utilise a 15 ml centrifuge tube as a collection tube, so the columns can be centrifuged for rapid purification.

Supplier: MACHEREY-NAGEL

These wet strengthened hard smooth filter papers are made of refined pulp and linters and have a low ash content. They are often used for quantitative routine procedures and for analytical gravimetric applications.

Supplier: Cytiva

Protein A HP SpinTrap™ columns are designed for the enrichment of proteins of interest, immunoprecipitation and the purification of monoclonal and polyclonal antibodies from cell lysates and biological fluids.

Supplier: MACHEREY-NAGEL

MN GF-6 is a binder-free glass fibre filter paper with medium retention and flow rate for general laboratory filtration.

Supplier: Corning

Glass fiber filters are used a depth filter for prefiltration of solutions.

Supplier: MACHEREY-NAGEL

The MN 85/90 grade is the most widely used, general purpose glass fiber filter with very good mechanical stability. The filter contains an organic binder.

Supplier: Sartorius

Sartoclear Dynamics® Lab V kits enable clarification and sterile filtration to be performed in a single step.

Supplier: MACHEREY-NAGEL

MN 85/70 is slightly less retentive than MN 85/90, lighter and thinner. The filter contains an organic binder for high mechanical strength.

Supplier: Spectrum Laboratories

Hollow fibre filter modules are particularly useful in tangential flow filtration because processes can easily be scaled-up from small volume applications to full-scale production.

Supplier: MACHEREY-NAGEL

MN GF-1 is a binder-free glass fiber filter paper that offers fine particle retention, high flow rate and good loading capacity. It is used for high efficiency laboratory filtration as well as air sampling. It is manufactured from borosilicate glass fiber and is resistant towards most organic and inorganic solvents.

Supplier: Spectrum Laboratories

Hollow fibre filter modules are particularly useful in tangential flow filtration because processes can easily be scaled-up from small volume applications to full-scale production.