Du søgte efter: Flaskelåg

Supplier: VWR Collection

Spare caps are designed for use with either narrow mouth or wide mouth VWR® carboys

Supplier: VWR Collection

screw cap, Til: Wide neck bottles, Gevind: 65 mm, Til flasker: 1000/1500/2000 ml

Supplier: VWR Collection

Sterile vented cap indivually wrapped, green, for 2000 ml bottes

Supplier: VWR Collection

Screw caps, tamper evident, Gevind: 28 mm, Farve: hvid, PP, Til: Sampling bottles

Supplier: VWR Collection

Screw cap, Til: bottles, Gevind: 28 mm

Supplier: LAB3 OWN PRODUCTION

Screw cap, PP, white, with PTFE liner, VWR®, Gevind: 28,00 mm

Supplier: DWK Life Sciences

Connection system with PP screw cap GL 45 with two or three PTFE ports. Flexible modular system. Typical applications: safe transfer of liquid media within a closed and sterile system (evaporation is reduced).

Supplier: DWK Life Sciences

TPCh260, farveløs.

Supplier: RIXIUS

Metal, white.

Supplier: Lenz Laborglas GmbH & CO.KG

Borosilicate glass 3.3.

Supplier: Bohlender

Black screw cap, made of conductive PPS-EX, for GL 45 threaded bottles and distributor body made of conductive PTFE-EX.

Supplier: Thermo Fisher Scientific

HDPE with silicone/PTFE septum.

Supplier: DWK Life Sciences

Screw caps, PBT, closed, red, without seal, PBT, DURAN®, Gevind: GL 45

Supplier: RIXIUS

Screw cap, Til: 100 ml amber glass jar, Farve: sort, Gevind: GL 52, Farve: sort, Til: 100 ml amber glass jar

Supplier: Corning

The 120 mm Center Cap Assembly for Corning® Spinner Flasks is designed for use with direct overhead drive motor.

Supplier: Bohlender

Screw cap made of PP with handy knurl and internal PTFE/silicone gasket. After assembly, the product is only exposed to PTFE.

Supplier: DWK Life Sciences

These stretchable silicone lids are used to close round and square vessels and are available in three sizes and colours, as well as a set of three.

Supplier: Bohlender

PPS-skruelåg, sort, fordelerenhed af PTFE eller PFA.

Supplier: DWK Life Sciences

PP og PTFE.

Supplier: Bohlender

Black screw cap made of PPS and available with or without stopcocks. Distributor body made of PTFE with 2 or 3 ports with female thread UNF 1/4" 28 G on upper and lower sides and stopcock made of FEP for each port.

Supplier: RIXIUS

Screw cap, sealing of closure LDPE, Til: Bottles, PP, Gevind: GL 45, Farve: sort, PP

Supplier: Thermo Fisher Scientific

Designed to aseptically handle solutions in biopharmaceutical, biotechnology and laboratory liquid transfer applications, these two- and three-ported closures are designed for Thermo Scientific™ Nalgene™ Biotainer™ bottles and carboys. With Animal Derived Component-Free (ADCF) components, including seals that are sonically-welded to the cap, and leak-proof closures, security of high value contents are guaranteed during fluid transfer.

Supplier: Thermo Fisher Scientific

PP plug connectors with hose barb.

Supplier: DWK Life Sciences

The reusable GL 32 caps allow the smaller 50 ml round or 100 ml DURAN® square bottles to be used be used for sampling, liquid feeding or transfer. Flexible options of 2, 3, or 4 stainless steel tubing connectors.The barbed male tubing connector are suitable for tubing with a 3,2 mm inner diameter such as BPT peristaltic pump tubing.

Supplier: Bohlender

PTFE, white.

Supplier: Sartorius

Screw cap, with silicone seal and tube inlet, Til: Woulff's bottles, Gevind: GL 25, PP

Supplier: Kautex

Leakproof LDPE screw closures are packaged in polyethylene bags.

Supplier: DWK Life Sciences

A highly transparent and ergonomic polymethylpentene cap for GL 45 DURAN® laboratory bottles.

Supplier: RIXIUS

Closures with brush made of HDPE.

Supplier: Thermo Fisher Scientific

Polypropylene closure with thermoplastic elastomer septum.