You searched for: Standards

Supplier: LGC Standards PROMOCHEM

Organic Standard, (6RS)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)piperidin-1-yl]ethyl]-2,6-dimethyl-6,7,8,9-tetrahydro-4H-pyrido[1,2-a]pyrimidin-4-one

Supplier: CUSTOM MADE CHEMICALS LAB

Hydrazine sulphate solution, : N/A

Supplier: CPACHEM

2×10 ml Potassium dichromate solution for absorbance control 235 - 350 nm and 6×10 ml

Supplier: CUSTOM MADE CHEMICALS LAB

500 ml solution contains 50 mg/L Al, As, Ba,Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Sr, Zn and 500 mg/L K in 5% HNO₃.

Supplier: LGC Standards PROMOCHEM

These reference standard is intended for use in the evaluation of analytical methods used for the classification of coal fly ash and for the determination of constituent elements in coal fly ash or materials of a similar matrix.

Supplier: LGC Standards PROMOCHEM

This standard material is intended to use in validating analytical methods and in calibrating instruments used in the analysis of phosphate rock, fertilisers and similar materials.

Supplier: LGC Standards PROMOCHEM

The PTP has been specially designed for analytical laboratories that analyse new and used oils for metals, sulphur, viscosity and particle count.

Supplier: LGC Standards PROMOCHEM

This reference material is intended for use in the evaluation of chemical and instrumental analysis and in calibration of those methods.

Supplier: LGC Standards PROMOCHEM

Grey cast iron (carbon + sulfur), NIST-334

Supplier: LGC Standards PROMOCHEM

These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).

Supplier: LGC Standards PROMOCHEM

NIST-1646A, estuarine sediment - metals, : N/A

Supplier: LGC Standards PROMOCHEM

This solution for using as calibration blank for biodiesel metals and sulphur analysis.

Supplier: VARIAN

500 ml solution contains 5 mg/l Al, As, Ba,Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Sr, Zn and 50 mg/l K in 5 % HNO3 + tr HF.

Supplier: LGC Standards PROMOCHEM

This reference material intended to use in validating methods for determining proximates, fatty acids, calories, vitamins, elements, catechins, caffeine, theobromine, and acrylamide in baking chocolate and similar matrices. It can be used for quality assurance in-house control materials.

Supplier: LGC Standards PROMOCHEM

This Reference material is intended for daily use in conjunction with measurement of elements in wastewaters. The water solution contains 13 elements with concentrations traceable to ultra pure metals or stoichiometrically well-defined substances.

Supplier: LGC Standards PROMOCHEM

These standards are intended for use as calibration and reference standards for the determination of fatty acid methyl esters (FAME) biodiesel content in diesel fuel by infrared (IR) spectroscopy. They are formulated specifically for use with ASTM Method D7371 and EN 14078.

Supplier: Endress+Hauser

Precision solution referred to SRM of NIST.

Supplier: LGC Standards PROMOCHEM

Hard drinking water UK low level metals, : N/A

Supplier: LGC Standards PROMOCHEM

This reference standards are intended to use in the determination of trace elements in fresh water. The solution contains nitric acid at a volume fraction of approximately 2%, equivalent to an amount of substance concentration (molarity) of approximately 0,32 mol/l and also it simulates the elemental composition of fresh water.

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended for use in the determination of constituent elements in clay and material of similar matrix. Powdered clay was air-dried, ball-milled and blended to ensure homogeneity.

Supplier: LGC Standards PROMOCHEM

NIST-107C, cast iron (Ni-Cr-Mo)

Supplier: LGC Standards PROMOCHEM

NIST-2890, water saturated octanol, NIST

Supplier: PerkinElmer

Perkalloy, three 50,8 mm pieces (596 °C)

Supplier: LGC Standards PROMOCHEM

Custom blend S-21+K, CONOSTAN®, 885 ppm

Supplier: LGC Standards PROMOCHEM

Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).

Supplier: LGC Standards PROMOCHEM

These are intended primarily for the evaluation and calibration of methods for analysis of cements and materials of similar matrix.

Supplier: VARIAN

These hydrophilic polymers are suitable for both aqueous SEC and organic GPC using the majority of polar organic solvents. The two types are chemically similar that can be used together across a wider molecular weight range with aqueous and organic polymers.

Supplier: CUSTOM MADE CHEMICALS LAB

Total acid number TAN 17034, 2 mg KOH/g

Supplier: LGC Standards PROMOCHEM

This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended primarily for use in the evaluation of methods used for the analysis of sludges and other materials of a similar matrix.