Supplier: AGILENT HEWLETT PACKARD

The peristaltic pump tubing has to be washed prior to use. The common way is to run about 5% HNO₃ (v/v) solution.

Supplier: Merck

Merck columns come in three formats.

Supplier: Merck

FocusLiner™ inlet liners are designed with wool plug to promote the rapid vaporisation of the entire sample, minimise mass discrimination, and prevent non-volatile material from entering the column. It incorporates a unique design to prevent the shifting of the wool plug during repeated injections or sudden inlet pressure changes. These liners are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Merck

SPME-GC inlet liners are designed for optimum sample introduction for specific injection techniques that are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: VWR Collection

ChromasterUltra Rs, ChromasterUltra Rs flow cell unit for 6430 diode array detector (path 10 mm, volume 2,2 µl)

Supplier: Merck

These SPME fiber assemblies can be reused for up to 100 analyses depending on the application.

Supplier: VWR Collection

Chromaster, Chromaster Plus HPLC interface control board for Chromaster Plus system control. USB cable and e-line cable (0,5 m) included, built into the autosampler upon installation in laboratory, if no autosampler is used, then the interface box (S) must be ordered instead

Supplier: Avantor

J.T.Baker®, Adapter, blue, for attaching reservoir or Luer tip to PP SPE columns

Supplier: VWR Collection

This spare part is suitable for Chromaster 5210 and 5260 autosamplers. For Chromaster 5210 AS from Serial No. 1309-001 and 1309T-001 onward. For Chromaster 5260 AS from Serial No. 1205-001 and 1205T-001 onward.

Supplier: VWR Collection

Maintenance parts kit for Chromaster HPLC 5210/5260 autosamplers, type B. Kit contains 1× injection port seal 893-0810, 1× injection valve seal (PEEK) 893-0809, 1× syringe valve seal 893-0814, 1× syringe tip, 175 µl 893-0808

Supplier: VWR Collection

Syringe tip, 700 µl

Supplier: VWR Collection

These spare parts are suitable for certain HPLC pumps.

Supplier: Bohlender

Integrate b.safe system caps and b.safe funnels in laboratory hoods or working tables. Liquid solvent waste can be lead directly into canisters via b.safe waste pipes.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Trajan Scientific and Medical

Autosampler syringes for AOC14, AOC17 and AOC20.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Bohlender

For easy bundling and fixing of signal cables, grounding cables, waste tubes, and vent tubes inside of safety cabinets and built-in installations.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: S.C.A.T.

The HPLC waste-sets, V2.0 are economical combinations for clean and safe disposal of liquid laboratory waste by HPLC systems or other analytical instruments. All sets consist of a canister and an original SCAT SafetyCap with exhaust filter as well as fittings, blind plugs and a tube connector.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: S.C.A.T.

These safety funnels and containers are used all over the world wherever the safe disposal of liquid waste is important. To ensure that collection points are also quickly ready for use, the most popular products have been assembled as sets. This requires only one part number for the comprehensive safety system, guaranteed compatible without time-consuming assembly of individual components.

Supplier: Trajan Scientific and Medical

Autosampler syringes for PerkinElmer AutoSystem.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Bohlender

Complete set for equipping one HPLC system.

Supplier: Trajan Scientific and Medical

Deactivated liners for DANI GCs.

Supplier: HAMILTON BONADUZ

The Neuros™ adapter kit attaches to any 5,0 to 100 µl removable needle (RN) syringe.

Supplier: Trajan Scientific and Medical

Deactivated liners for ATAS optic injectors.

Supplier: Trajan Scientific and Medical

Injection loop, PEEKsil™, 10 µl, 0,22 mm I.Ø, length 260 mm, for Rheodyne® and Valco® valves