You searched for: Petroleum Industry Standards

Supplier: Restek

The MA VPH matrix spike mix consists of 14 components they are (C5) n-pentane, (C9) n-nonane, benzene, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether (mtbe), naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane (isooctane), m-xylene, o-xylene and p-xylene.

Supplier: Restek

The MA VPH standard consists of 14 components they are (C5) n-pentane 1000 μg/ml, (C9) n-nonane 1000 μg/ml, benzene 500 μg/ml, 2,5-dibromotoluene (SS) 1000 μg/ml, ethylbenzene 500 μg/ml, 2-methylpentane 1500 μg/ml, methyl tert-butyl ether (MTBE) 1500 μg/ml, naphthalene 1000 μg/ml, toluene 1500 μg/ml, 1,2,4-trimethylbenzene 1000 μg/ml, 2,2,4-trimethylpentane (isooctane) 1500 μg/ml, m-xylene 1,000 μg/ml, o-xylene 1,000 μg/ml and p-xylene 1,000 μg/ml.

Supplier: Restek

D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.

Supplier: Restek

These high molecular weight hydrocarbon waxes are useful for simulated distillation and other high temperature GC work.

Supplier: Restek

JP-5 military fuel, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule

Supplier: Restek

Consists of three components, those are benzene, 2-butanol and toluene.

Supplier: Restek

Consists of three components, those are benzene, 2-butanol and toluene.

Supplier: Restek

The mix consists of benzene (2,5% vol/vol), toluene (15% vol/vol).

Supplier: Restek

A high-viscosity residual type of heavy fuel oil requiring preheating to 104 to 127 °C. This material is also known as residual fuel oil (RFO) or Bunker C.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene, ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.

Supplier: EHRENSTORFER

Regular diesel fuel, 2500 µg/ml in methanol, Reference standard

Supplier: Restek

Contains 1-chlorooctadecane.

Supplier: Restek

Consists of three components, those are benzene, 2-butanol and toluene.

Supplier: Restek

The glycol standard consists of two components they are ethylene glycol and propylene glycol.

Supplier: Restek

100-octane, low-lead fuel used in piston-type aircraft.

Supplier: Restek

The mix consists of benzene (1,25% vol/vol), toluene (10% vol/vol).

Supplier: Restek

This consists of 10W30 motor oil:diesel fuel #2 (1:1 blend).

Supplier: Restek

The mix consists of diesel fuel #2 composite, mineral oil.

Supplier: Restek

This contains n-hexane (C6), n-decane (C10), n-docosane (C22) and n-dotriacontane (C32).

Supplier: Restek

For monitoring samples suspected of gasoline contamination requires laboratories to calibrate and report these compounds.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Supplier: Restek

The standard consists of ethanethiol, 1-propanethiol, 1-butanethiol, 1-pentanethiol, 1-hexanethiol, 1-heptanethiol, 3,5-dimethylbenzenethiol, 1-octanethiol, 1-nonanethiol, 1-decanethiol, 1-pentadecanethiolol, 1-hexadecanethiol and 1-octadecanethiol.

Supplier: Restek

The weathered materials indicate the percent weight loss from the original material. Prepared from a single source (one refinery) product.

Supplier: Restek

Components in this mix (0,5 μl/ml or 0,05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.

Supplier: Restek

It consists of benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene, isopropylbenzene (cumene), 2-methylnaphthalene, methyl tert-butyl-ether (MTBE), naphthalene, toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.

Supplier: Restek

This is for total petroleum hydrocarbon pattern recognition of hydraulic oil.

Supplier: Restek

o-terphenyl, 2000 μg/ml in acetone, 1 ml/ampule, for internal standard