Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
ASTM® D6584 standard solution 4, in pyridne, analytical standard, Honeywell Fluka™
Supplier: Honeywell Chemicals
High quality inorganic and organic reference materials produced according to ISO 9001.
Expand 1 Items
ASTM® D6584 Glycerin solution, 500 μg/ml in pyridine, analytical standard, Honeywell Fluka™
Supplier: Honeywell Chemicals
High quality inorganic and organic reference materials produced according to ISO 9001.
Expand 1 Items
ASTM® D6584 standard solution 2, in pyridne, analytical standard, Honeywell Fluka™
Supplier: Honeywell Chemicals
High quality inorganic and organic reference materials produced according to ISO 9001.
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
ASTM® D6584 standard solution 3, in pyridne, analytical standard, Honeywell Fluka™
Supplier: Honeywell Chemicals
High quality inorganic and organic reference materials produced according to ISO 9001.
Expand 1 Items
ASTM® D6584 individual stock and internal standards mix Kit, analytical standard, Honeywell Fluka™
Supplier: Honeywell Chemicals
High quality inorganic and organic reference materials produced according to ISO 9001.
Expand 1 Items
ASTM® D6584 Tricaprin solution, 8000 μg/ml in pyridine, analytical standard, Honeywell Fluka™
Supplier: Honeywell Chemicals
High quality inorganic and organic reference materials produced according to ISO 9001.
Expand 1 Items
ASTM® D6584 standard solution 5, in pyridne, analytical standard, Honeywell Fluka™
Supplier: Honeywell Chemicals
High quality inorganic and organic reference materials produced according to ISO 9001.
Expand 1 Items
System Calibration Standard (7 components)
Supplier: CPACHEM
System calibration standard with 7 components.
Expand 1 Items
Petrochemical standard, bio diesel fuel, Dr. Ehrenstorfer
Supplier: EHRENSTORFER
Bio diesel fuel, Reference standard
Expand 1 Items
Diesel #2/Motor Oil (2 components)
Supplier: Restek
Diesel fuel #2 composite and Motor oil.
Expand 1 Items
ASTM® D3606 calibration standard #1 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (5% vol/vol), toluene (20% vol/vol).
Expand 1 Items
ASTM D3606 calibration standards with MEK internal standards
Supplier: Restek
ASTM D3606 calibration standard #7 with MEK internal standard, isooctane includes benzene, 0,0576%, 2-butanone, 4%, toluene 0,48%, Pk Info: 1 ml/ampoule
Expand 7 Items
Method 1664 oil and grease mix (2 components)
Supplier: Restek
Contains two components, those are n-hexadecane and stearic acid.
Expand 1 Items
Gasoline component standard, 10 components
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.
Expand 1 Items
ASTM D2887-12 calibration standard (20 components)
Supplier: Restek
Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.
Expand 1 Items
Unleaded gasoline composite standards for UST monitoring
Supplier: Restek
Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.
Expand 7 Items
Diesel fuel #2 composite standard
Supplier: Restek
Diesel fuel composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.
Expand 2 Items
Gasoline range organics, VOA Mix
Supplier: Restek
GRO mix (EPA) with 9 components, includes benzene, 1, 2, 4-trimethylbenzene, ethylbenzene, 2, 2, 4-trimethylpentane, heptane, m-xylene, 2-methylpentane, o-xylene, toluene, in purge and trap methanol, 1 ml/ampule
Expand 2 Items
WA EPH aromatic hydrocarbon mix (6 components)
Supplier: Restek
The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.
Expand 1 Items
Weathered gasoline kit #2
Supplier: Restek
These solutions are prepared from a single-source (one-refinery) product. The weathered materials indicate the percent weight loss from the original material. Samples of regular- and premium-grade unleaded gasoline were collected, then blended in equal volumes.
Expand 1 Items
Diesel range organic standard (EPA/WISC)
Supplier: Restek
DRO mix (EPA/wisconsin) with 10 components, includes n-decane (C10), n-eicosane (C20), n-dodecane (C12), n-docosane (C22), n-tetradecane (C14), n-tetracosane (C24), n-hexadecane (C16), n-hexacosane (C26), n-octadecane (C18), n-octacosane (C28), with 2000 μg/ml each in methylene chloride in 1 ml/ampule
Expand 3 Items
MA VPH matrix spike mix with surrogate (14 components)
Supplier: Restek
The MA VPH matrix spike mix consists of 14 components they are (C5) n-pentane, (C9) n-nonane, benzene, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether (mtbe), naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane (isooctane), m-xylene, o-xylene and p-xylene.
Expand 1 Items
MA VPH standard with surrogate
Supplier: Restek
The MA VPH standard consists of 14 components they are (C5) n-pentane 1000 μg/ml, (C9) n-nonane 1000 μg/ml, benzene 500 μg/ml, 2,5-dibromotoluene (SS) 1000 μg/ml, ethylbenzene 500 μg/ml, 2-methylpentane 1500 μg/ml, methyl tert-butyl ether (MTBE) 1500 μg/ml, naphthalene 1000 μg/ml, toluene 1500 μg/ml, 1,2,4-trimethylbenzene 1000 μg/ml, 2,2,4-trimethylpentane (isooctane) 1500 μg/ml, m-xylene 1,000 μg/ml, o-xylene 1,000 μg/ml and p-xylene 1,000 μg/ml.
Expand 1 Items
Petroleum standards, polywax
Supplier: Restek
These high molecular weight hydrocarbon waxes are useful for simulated distillation and other high temperature GC work.
Expand 3 Items
JP-5 military fuel standard
Supplier: Restek
JP-5 military fuel, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
ASTM D3606 calibration standard #2 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
ASTM® D3606 calibration standard #5 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
ASTM D3606 calibration standard #2 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (2,5% vol/vol), toluene (15% vol/vol).
Expand 1 Items
Fuel oil #6 standards
Supplier: Restek
A high-viscosity residual type of heavy fuel oil requiring preheating to 104 to 127 °C. This material is also known as residual fuel oil (RFO) or Bunker C.
Expand 3 Items
WA EPH aliphatic hydrocarbon mix (6 components)
Supplier: Restek
The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.
Expand 1 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Integra
Supplier: Industrial Physics
Supplier: AAT BIOQUEST
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One