You searched for: Petroleum Industry Standards

Supplier: Merck

n-Paraffin Mix C24, C28, C32, C36, Supelco®, 2 % (w/w) each component in octane

Supplier: VWR Chemicals

Polysulphide CRMs are suitable for calibration, verification, or for use in quality control procedures used for analysing sulphur content in petroleum products.

Supplier: VWR Chemicals

Cloud Point Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Cloud Point according to IP 219, ISO 3015, EN 23015, ASTM D2500 and other equivalent test methodology.

Supplier: VWR Chemicals

Flash point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products. COC flash point standards are tested and certified in accordance with ASTM D92 'Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.'

Supplier: Merck

Tetratetracontane ≥98.0% (GC), Supelco®

Supplier: Merck

No. 2 Fuel Oil, refinery grade, Supelco®, 20000 mug/mL in methanol

Supplier: VWR Chemicals

At stated conc. (µg/ml): Palmitic acid methyl ester (800); Stearic acid methyl ester (800); Methyl cis-9-octadecenoate (800); Linoleic acid methyl ester (800); Chrysene (400); Linolenic acid methyl ester (800).

Supplier: Merck

Alkane standard mixture for performance tests of GC-systems, C10 - C40 (all even), Supelco®, 50 mg/l each

Supplier: Merck

ASTM(R) D5441 MTBE Contaminants (low) Mix B, Supelco®, 0.1 % (w/w) each component in methyl tert-butyl ether

Supplier: Merck

ASTM® D5307 crude oil internal standard has been used in the quantitative determination of diamondoid compounds like adamantane in specific organic solvents like dichloromethane, hexane, carbon-tetrachloride, hexane , heptadecane, hexadecane, pentadecane and tetradecane, using infrared attenuated total reflection spectroscopy (IR-ATR).

Supplier: VWR Chemicals

Fuel testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Octane Number.

Supplier: VWR Chemicals

Fuel testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Cetane Number ISO 5165 / EN 61715.

Supplier: VWR Chemicals

Pour Point Certified Reference Materials for the verification of laboratory instruments used in testing petroleum and derivative products for Pour Point to ASTM D97, IP 15, ISO 3016 and other equivalent international test methodologies.

Supplier: VWR Chemicals

Fuel testing Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products. This includes, but is not limited to, the analysis and measurement of: Acidity content, sulphur content, aniline point, Fluorescent Indicator Adsorption (FIA) aromatics, freezing point.

Supplier: VWR Chemicals

Flash point Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Abel Closed Cup (IP 170, ISO 13736).

Supplier: VWR Chemicals

Flash point Certified Reference Materials are for the verification of laboratory flash point instruments that are used in testing petroleum and derivative products. PMCC flash point standards are tested and certified in accordance with ASTM D93 'Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester - Procedure A'

Supplier: VWR Chemicals

Flash point Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for TAG Closed Cup (ASTM D56).

Supplier: VWR Chemicals

Cold Filter Plugging Point (CFPP) Certified Reference Materials are for the verification of laboratory instruments used in testing petroleum and derivative products for Cold Filter Plugging Point (CFPP) according to IP 309, EN 116 and ASTM D6371 also other equivalent test methodology.

Supplier: VWR Chemicals

COC flash point standards are tested and certified in accordance with ASTM D92 'Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester.'

Supplier: TCI

Standard Mixture of n-Paraffins (consists of C21, C22, C23, C24 and C25)

Supplier: TCI

Standard Mixture of Fatty Acid Methyl Esters (consists of Methyl Hexanoate, Heptanoate, Octanoate, Nonanoate, and Decanoate)

Supplier: TCI

Sulfur Content 20 mass ppm level

Supplier: TCI

Reference Material for Flash Point Certified by The Japan Petroleum Institute, Glass bottle

Supplier: TCI

Standard Mixture of n-Paraffins (consists of C7, C8, C9, C10 and C11)

Supplier: TCI

Nickel Content 22 mass ppm and Vanadium Content 53 mass ppm

Supplier: TCI

Standard Mixture of Fatty Acid Methyl Esters (consists of Methyl Formate, Acetate, Propionate, Butyrate and Valerate)

Supplier: VWR Chemicals

Fuel testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Smoke Point ASTM D1322 / IP 57.

Supplier: TCI

Reference Material for Flash Point Certified by The Japan Petroleum Institute

Supplier: VWR Chemicals

Total Acid Number (TAN) standards are specifically manufactured for the verification of analytical instruments used to determine acid number by potentiometric titration. Each standard is certified in strict accordance with international test method protocols, ASTM D664 / IP 177.

Supplier: VWR Chemicals

MPCRM’s provide both calibration and verification options for laboratory test equipment, all from the same sample, with their values certified to the highest level of accreditation integrity available globally.