Physics Educational Materials

Supplier: CORNELSEN EXPERIMENTA

For experiments with absorption of heat radiation. Consists of a black and a white E-flask and two thermometers (0 to 50 °C).

Supplier: CORNELSEN EXPERIMENTA

72 series-connected semiconductor elements, mounted between two ceramic plates which in turn are attached to heat-conducting metal. If the metals are exposed to different temperatures, a voltage arises, sufficient to drive, for example, a slightly rotating motor. The thermogenerator can also be run in the other direction, ie. a voltage is connected and a temperature difference is obtained across the metal legs.

Supplier: 3B Scientific

Educational Materials, Electricity/Magnetism, Application: Physics, Adapter, BNC connector to 4 mm Jack plugs with 19 mm spacing.

Supplier: 3B Scientific

Highly evacuated electron tube for determining the wavelength of electrons as a function of the anode voltage from the radii of the diffraction rings and the distance between the lattice planes of graphite (Debye-Scherrer-diffraction) and rendered visible on a fluorescent screen. Also intended for determining the wavelengths of monochromatic radiation at different anode voltages from the radii of the diffraction rings and the lattice plane spacing of graphite, as well as confirming de Broglie’s hypothesis.

Supplier: CORNELSEN EXPERIMENTA

Used in electrostatic experiments. Equipped with holes, 4 mm, at one end for connection of conductor ball or capacitor plate.

Supplier: CORNELSEN EXPERIMENTA

Used in electrochemistry. Voltage, max 1 V. The unit is divisible and consists of glass beaker, cylindrical zinc electrode, plastic beaker, cylindrical copper electrode and crocodile clamps. Fill with copper sulphate (10%) or zinc sulphate (10%). A light-rotating motor with a propeller is suitable as a voltage indicator.

Supplier: CORNELSEN EXPERIMENTA

Used in electrochemistry. Voltage, max 1.5 V. The unit is divisible and consists of glass beaker, cylindrical zinc electrode, plastic beaker, carbon electrode, manganese oxide, crocodile clamps and lid. Fill with ammonium chloride solution (20%).

Supplier: 3B Scientific

Tube holder to support all S series electron tubes for easy and safe operation. The five pin sockets for the tube are concealed inside the tube holder. A cathode protection switch is integrated into the tube holder, to protect the heated cathode from excessive voltage. The base plate has a slot for attaching the Helmholtz pair of coils S.

Supplier: GR NNA PLASTEMBALLAGE AB

The set is primarily intended for the upper level of elementary school or the equivalent level of knowledge. It is suitable for both demonstration and laboratory use. The kit can be used in any room with access to water. The kit includes everything needed with the exception of table salt, rubbing alcohol, cotton and cardboard sheets. The material is stored in a specially designed wooden box. Through a wealth of detail and many combination possibilities, basic physics experiments can be carried out in a number of different areas. Examples of attempts:

Supplier: CORNELSEN EXPERIMENTA

Used to show how metal wire resistance depends on length, cross-sectional area and material. Made of plastic and equipped with 6 tensioned wires connected with 4 mm banana plugs.

Supplier: CORNELSEN EXPERIMENTA

Used in electrochemistry. Voltage, max 2 V. The unit is divisible and consists of glass beaker, cylindrical zinc electrode, plastic beaker, carbon electrode, crocodile clamps and lid. Fill with nitric acid (65%) or sulfuric acid (8%). A light-rotating motor with a propeller is suitable as a voltage indicator.

Supplier: CORNELSEN EXPERIMENTA

Educational Materials, Mechanics, Application: Physics, Lead ball, 25 mm

Supplier: CORNELSEN EXPERIMENTA

Metal frame with tension spring and membrane of Papyrolin. With the help of two tambourines and a pendulum ball, experiments with pressure waves can be performed.

Supplier: PHYWE

Supplementary kit for table optics 765-1317. Content:

Supplier: CORNELSEN EXPERIMENTA

For electrostatic experiments. Consists of insulated aluminum holder with pointed bearing, removable capacitor plate, metal ring with rod and 4 mm earthing contact.

Supplier: CORNELSEN EXPERIMENTA

Equipment to determine the buoyancy of different materials. It consists of three balls - wood, styrofoam and plastic, a pulley, and twine. The balls incorporate a hook for attachment of twine. Stand not included.