Supplier: GR NNA PLASTEMBALLAGE AB

The set is primarily intended for the upper level of elementary school or the equivalent level of knowledge. It is suitable for both demonstration and laboratory use. The kit can be used in any room with access to water. The kit includes everything needed with the exception of table salt, rubbing alcohol, cotton and cardboard sheets. The material is stored in a specially designed wooden box. Through a wealth of detail and many combination possibilities, basic physics experiments can be carried out in a number of different areas. Examples of attempts:

Supplier: CORNELSEN EXPERIMENTA

With the equipment, centrifugal forces that arise during a body's rotation around a specific axis can be measured and examined. The device consists of a plane with a path for a cart. On the underside there is a vertical shaft that is mounted in a bearing. The plane is made to rotate with a laboratory motor connected with a drive belt to the bearing. The experimental trolley is placed on the track and prevented from leaving the track by two bent steel wires. A wire is connected to the trolley that runs over a pulley and on to a dynamometer.

Supplier: CORNELSEN EXPERIMENTA

Used in electrochemistry. Voltage, max 2 V. The unit is divisible and consists of glass beaker, cylindrical zinc electrode, plastic beaker, carbon electrode, crocodile clamps and lid. Fill with nitric acid (65%) or sulfuric acid (8%). A light-rotating motor with a propeller is suitable as a voltage indicator.

Supplier: CORNELSEN EXPERIMENTA

For experiments with absorption of heat radiation. Consists of a black and a white E-flask and two thermometers (0 to 50 °C).

Supplier: CORNELSEN EXPERIMENTA

Used in electrochemistry. Voltage, max 1 V. The unit is divisible and consists of glass beaker, cylindrical zinc electrode, plastic beaker, cylindrical copper electrode and crocodile clamps. Fill with copper sulphate (10%) or zinc sulphate (10%). A light-rotating motor with a propeller is suitable as a voltage indicator.

Supplier: CORNELSEN EXPERIMENTA

Shows that the bottom pressure in a liquid depends only on the height and not the shape of the container. The fluid pressure is transferred via a rubber diaphragm to an adjustable hand. Comes with four containers of different shapes. Dimensions.

Supplier: 3B Scientific

Function generator with external sweep function and power amplifier for use in versatile student and practical experiments covering simple harmonic oscillation, AC electricity and induction. Featuring illuminated, digital display for frequency, signal form, offset and other parameters.

Supplier: MOLLER THERM

Radiometer according to Crookés. Consists of a glass container on foot with low air pressure and needle-bearing spinner with four vertical mica discs. The discs are black on one side and shiny on the other. The discs thus absorb radiation differently. The higher temperature of the dark side means that the air molecules get greater kinetic energy in collision with the dark side of the discs than with their shiny side. The result is that the spinner starts to rotate.

Supplier: LABDESIGN

Educational Materials, Blood Analysis, Application: Forensics, Anti-D. serum to detect blood type D

Supplier: CORNELSEN EXPERIMENTA

For experiments with thermoelectric effects. Consists of brazed copper and constant wire. Equipped with connections for 4 mm banana connectors. Mounted on plate with rod, 10 mm.

Supplier: CORNELSEN EXPERIMENTA

The kit contains about 15 different components with which a number of experiments can be performed. The components are designed so that students can quickly and easily perform their laboratory work. The kit can show how the following forms of energy are generated:

Supplier: CORNELSEN EXPERIMENTA

Apparatus for examining the conversion from electrical energy to light and heat energy. Consists of a plastic container, lid with light bulb (6 V / 5 A) in base and a resistor. The container is filled with water and the temperature change is measured. Equipped with connections for 4 mm banana plug.

Supplier: MOLLER THERM

Milk glass scale on polished wooden board. Colored liquid filling. Measuring range -10 to +100 ° C, 0 to +80 ° R, +20 to +212 ° F.

Supplier: CORNELSEN EXPERIMENTA

Insulating rod with two adjustable metal arms with ball ends.

Supplier: CORNELSEN EXPERIMENTA

For demonstration of electric field lines and electrostatic charge.

Supplier: 3B Scientific

Highly evacuated electron tube for determining the wavelength of electrons as a function of the anode voltage from the radii of the diffraction rings and the distance between the lattice planes of graphite (Debye-Scherrer-diffraction) and rendered visible on a fluorescent screen. Also intended for determining the wavelengths of monochromatic radiation at different anode voltages from the radii of the diffraction rings and the lattice plane spacing of graphite, as well as confirming de Broglie’s hypothesis.

Supplier: 3B Scientific

Voltameter, Electricity/Magnetism, Application: Electricity, Hofmann’s Voltameter, incl. gas collection tube, platinum electrodes, plastic hose with levelling bulb, stand ring, universal bosshead, stand baseplate with rod, dimensions ∼800×150 mm, rod Ø×H 12 mm×750 mm, retaining plate 120×110 mm

Supplier: CORNELSEN EXPERIMENTA

72 series-connected semiconductor elements, mounted between two ceramic plates which in turn are attached to heat-conducting metal. If the metals are exposed to different temperatures, a voltage arises, sufficient to drive, for example, a slightly rotating motor. The thermogenerator can also be run in the other direction, ie. a voltage is connected and a temperature difference is obtained across the metal legs.

Supplier: CORNELSEN EXPERIMENTA

The kit contains components for basic laboratory work with solar cells. The components are simply designed and the students quickly build their experimental setups. With the rate, e.g. the following are studied.

Supplier: GR NNA PLASTEMBALLAGE AB

Semiconductor type nonlinear resistors with large negative temperature coefficient (NTC resistors). Used for studies of temperature dependence of resistances, such as temperature sensors, current limiters, etc. Of standardized disc type with connecting wires.

Supplier: CORNELSEN EXPERIMENTA

For acoustic detection of standing sound waves and for determining the wavelength of the sound source and then the speed of sound in air (Velocity=frequency×wavelength). The system is filled with water and a sound source (tuning fork) is held to the open tube end. By varying the height of the reservoir and the height of the liquid in the tube students can determine the wavelength using audible effects associated with standing waves.

Supplier: CORNELSEN EXPERIMENTA

High voltage porcelain insulator. The high-voltage side is equipped with two radial and one axial holes for 4 mm banana pins and a slot with a clamping screw for plates with a maximum thickness of 4 mm. The grounded side has a radial hole for 4 mm banana pins. Insulation voltage: max 25 kV.