"Industrial Physics"

Supplier: Industrial Physics

Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Supplier: Industrial Physics

profi LIGNO are moisture meters specifically designed for wood and building materials such as screed or gypsum.

Supplier: Industrial Physics

Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Supplier: Industrial Physics

Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.

Supplier: Industrial Physics

Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Supplier: Industrial Physics

The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Supplier: Industrial Physics

mini LIGNO duo is a wood moisture meter that provides four different base-wood groups, eight building materials, such as gypsum or screed.

Supplier: Industrial Physics

This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

Supplier: Industrial Physics

This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Supplier: Industrial Physics

This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.

Supplier: Industrial Physics

This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

Supplier: Industrial Physics

The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Supplier: Industrial Physics

Lory viscosity cup designed for quick measurements on location or during production processes.

Supplier: Industrial Physics

SSPC-VIS 2 pictorial provides a method of evaluating degree of rusting on painted steel surfaces.

Supplier: Industrial Physics

This automatic adhesion tester measures the adhesion of coatings applied on metal, wood, concrete and similar substrates.

Supplier: Industrial Physics

The MaxiLigno are equipped with the latest technology for precision and easy handling.