181217 Resultater for: "Batch Pressure Filter Cloth"

Supplier: Restek

A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to ¹/₈" Ext.Ø PTFE tubing when finger tightened onto the precision-machined filter holder.

Supplier: EBRO

Both data loggers are high-precision temperature and pressure loggers designed for process validation in steam sterilisers, batch control, and pharmaceutical applications. With a wide temperature and pressure range and high accuracy, they provide reliable data logging for critical monitoring processes in sterilisation, healthcare, production, and pharmaceutical environments, ensuring accurate validation and quality control.

Supplier: Cytiva (Formerly Pall Lab)

Supor® hydrofil polyethersulfon (PES) membran, akrylhus: 0,2 µm udluftning. Positiv trykfiltrering til medium volumener af vandige laboratorieopløsninger. Til sterilisering eller klaring af op til tre liter serumfrit celle- og vævskulturmedie, medieadditiver og andre vandige opløsninger. Ideel til sterilisering af opløsninger som har en tendens til at skumme når de filtreres under vakuum.

Supplier: Sartorius

Ved filtrering af små volumener kobles holderen direkte til en trykkilde. Ved filtrering af op til 5 liter af relativ letfiltrerbare væsker (fx bufferopløsninger, opløsninger til celletællere og vækstkulturopløsninger), bruges den i kombination med tryktank.

Supplier: 3M

For effective protection against a range of particulates, gases, and vapours, or combination hazards, use 3M™ filters DT series. Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode as well as 3M™ powered air respirator system PF-600E+ series.

Supplier: ENTEGRIS

These filters are compatible with high purity gases as well as general nitrogen and CDA applications. Available in Bronze and Silver performance levels, they are specifically designed for high flow and low delta pressure applications and provide ultimate process protection by removing contaminants that could affect process quality.

Supplier: Sartorius

These filter papers are used for routine analyses like clarification, determination of substances, but also as discs with a center hole for technical applications. Grades with a wet burst resistance >30 kPa are referred to as wet-strengthened and are therefore
suitable for pressure or vacuum filtration.

Supplier: Cytiva (Formerly Pall Lab)

This 47 mm pressure filtration funnel features a stainless steel construction that offers excellent chemical resistance. Convenient hand tightening makes filter changing easy.

Supplier: Thermo Fisher Scientific

Designed specifically for high throughput sample processing, these filter plates are suitable for vacuum filtration, centrifugation or positive pressure techniques.

Supplier: Whatman products (Cytiva)

PS syringe filter holder for clarification and sterile filtration of liquids and gases under pressure.

Supplier: Merck

Ultraclean and dispense small volumes of solvent by squeeze-bottle action. This hand-pressure operated dispenser features a filter holder fitted with a delivery tube. Use to direct filtered solvent against surfaces.

Supplier: UPCHURCH SCIENTIFIC

These filters are ideal for higher pressure applications and to help prevent particulate contamination.

Supplier: 3M

For effective protection against a range of particulates, gases and vapours or combination hazards, use 3M™ filters DT-Series. Suitable for use with certain 3M™ half and full-face tight-fitting respirators in negative-pressure mode as well as 3M™ powered air respirator system PF-600E+ series.

Supplier: Biowest

Sterile filtered foetal bovine serum (FBS) derived from clotted whole blood aseptically collected from foetus via cardiac puncture. Each manufactured batch is rigorously controlled, from the collection of serum through to final packaging.

Supplier: 3M

Premium performance 3M™ PTFE glass cloth tape 5453 has a brown woven glass cloth backing impregnated with PTFE (polytetrafluoroethylene). This tape provides a slick surface on process machinery and offers an extremely low coefficient of friction which, in combination with a pressure sensitive silicone adhesive, creates a non-stick surface that performs at elevated temperatures.

Supplier: Cytiva (Formerly Pall Lab)

Nylon 6,6 membranes for fluid filtration in the pharmaceutical, biotechnology, electronics, food and beverage industries and for analytical applications. These membranes are very resistant to mechanical, chemical and thermal stress. They can be used in either direction, are inherently hydrophilic, have high flow rates, low pressure drops and very low extractables. Where appropriate, they can be steam sterilised without change in flow or pore size characteristic.

Supplier: Sartorius

These qualitative filter papers are essentially used for analytical purposes and routine analyses, whenever no gravimetric analyses are required. They are wet-strengthened and can be used for pressure and vacuum filtration. They are made of refined pulp and linters with an >95% alpha-cellulose content, are very pure with an ash content <0,1%.

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Supplier: Whatman products (Cytiva)

These filter holders are designed for microfiltration and ultra cleaning of small volumes of liquids using positive pressure.

Supplier: UPCHURCH SCIENTIFIC

Semi-prep inline filters
- Designed for high flow applications
- Flow rates up to 100 ml/min
- Pressure rated to 7500 psi (517 bar)

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%. They are used for routine analyses like clarification, determination of substances, but also as discs with a centre hole for technical applications. Grades with a wet burst resistance >30 kPa are referred to as wet-strengthened and are therefore suitable for pressure or vacuum filtration.

Supplier: Testo

This compact differential pressure measuring instrument testo 512 is the ideal solution for simple, fast and precise measurement of gas flow and static gas pressure on heating systems, for checking filters on air conditioning systems and for Pitot tube measurement in ventilation ducts.

Supplier: Restek

In-line gas pressure gauge kit, includes 1/8” tee and 0 - 689 kPa gauge

Supplier: 3M

Premium performance 3M™ PTFE glass cloth tape 5451 has a brown woven glass cloth backing impregnated with PTFE (polytetrafluoroethylene). This tape provides a slick surface on process machinery and offers an extremely low coefficient of friction which, in combination with a pressure sensitive silicone adhesive, creates a non-stick surface that performs at elevated temperatures.

Supplier: Cole-Parmer

Air pressure regulator/filter, stainless steel, Cole-Parmer®

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: THERMO FISHER DIAGNOSTICS

Where an AnaeroGen sachet is placed in a sealed jar, the atmospheric oxygen in the jar is rapidly absorbed with the simultaneous generation of carbon dioxide. This novel method differs from others commonly used in that the reaction proceeds with no evolution of hydrogen, and therefore, does not require a catalyst. Furthermore, water is not required to activate the reaction. When used as directed, the AnaeroGen sachet will reduce the oxygen level in the jar to below 1% within 30 minutes. The resulting carbon dioxide level will be between 9% and 13%.
CampyGen Compact for 1 or 2 Petri dishes, is a simple system for generating microaerobic conditions. The system consists of a plastic pouch and sealing clip and a paper gas generating sachet. The paper sachet contains ascorbic acid which reacts on contact with air to produce the microaerobic conditions for the growth of microaerophilic organisms.

Supplier: VWR Collection

Cords and pouches for safety eyewear spectacles.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.