Acetone
Acetone (C₃H₆O) is a volatile, flammable organic solvent and the simplest ketone, characterized by its low boiling point (56 °C), high miscibility with water, and excellent solvency for organic compounds. It is widely used in laboratory and industrial settings for degreasing, resin thinning, and as a solvent in coatings, adhesives, and pharmaceuticals. Due to its volatility and low flash point, acetone must be handled with care in well-ventilated areas, away from ignition sources.
Acetone ≥99.5% (by GC, corrected for water content), AR® ACS for histology, Macron Fine Chemicals™
Supplier: MACRON AVANTOR BRAND
For histological use.
Expand 1 Items
Acetone, J.T.Baker®
Supplier: Avantor
Acetone, J.T.Baker®
Expand 2 Items
Acetone 99+%, ekstra ren
Supplier: Thermo Fisher Scientific
Acetone 99+%, ekstra ren
Expand 5 Items
Acetone ≥99.5%, Environmental Grade for environmental analysis
Supplier: Thermo Fisher Scientific
Acetone ≥99.5%, Environmental Grade for environmental analysis
Expand 3 Items
Acetone ≥99.5%, GPR RECTAPUR®
Supplier: VWR Chemicals
Acetone ≥99.5%, GPR RECTAPUR®
Expand 8 Items
Acetone ≥99%, TECHNICAL
Supplier: VWR Chemicals
Acetone ≥99%, TECHNICAL
Expand 6 Items
Acetone ≥99.9%, PESTINORM® for capillary GC analysis
Supplier: VWR Chemicals
Acetone ≥99.9%, PESTINORM® for capillary GC analysis
Expand 2 Items
Acetone, CMOS for microelectronic, J.T.Baker®
Supplier: Avantor
Acetone, CMOS for microelectronic, J.T.Baker®
Expand 2 Items
Acetone ≥99.8%, SupraSolv® for GC-ECD/FID, Supelco®
Supplier: Merck
SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionisation Detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.
Expand 4 Items
Acetone, Uvasol® til spektroskopi, Supelco®
Supplier: Merck
Acetone, Uvasol® for spectroscopy, Supelco®
Expand 2 Items
Acetone, LiChrosolv® for HPLC, Supelco®
Supplier: Merck
With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in "gradient grade" as well as "isocratic grade". This enables to minimize the gradient effect of the solvent involved.
Expand 4 Items
Acetone 99.6% ACS
Supplier: Thermo Fisher Scientific
Acetone 99.6% ACS
Expand 3 Items
Acetone 99.9% (by GC, corrected for water content), ECD tested halocarbons free grade for residue analysis
Supplier: Thermo Fisher Scientific
Acetone 99.9% (by GC, corrected for water content), ECD tested halocarbons free grade for residue analysis
Expand 2 Items
Acetone ≥99.9%, PESTINORM® Supra Trace for organic trace analysis
Supplier: VWR Chemicals
Acetone ≥99.9%, PESTINORM® Supra Trace for organic trace analysis
Expand 1 Items
Acetone, BAKER ANALYZED® HPLC for HPLC, J.T.Baker®
Supplier: Avantor
Acetone, BAKER ANALYZED® HPLC for HPLC, J.T.Baker®
Expand 2 Items
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.
Katalog #: 83639.320
Leverandør: VWR Chemicals
Katalog #: 20864.320
Leverandør: VWR Chemicals
Katalog #: 83640.320
Leverandør: VWR Chemicals
Katalog #: 31770.294
Leverandør: VWR Chemicals
Katalog #: 1.00030.2500
Leverandør: Merck
Katalog #: 83645.320
Leverandør: VWR Chemicals
Katalog #: 20060.320
Leverandør: VWR Chemicals