Væskebehandlingsfiltre

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Avantor

These filters are made from 100% PEEK.

Supplier: Bohlender

Filter candle made of porous PE.

Supplier: Avantor

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: ROBU GLASFILTER

ROBU® VitraPOR® solvent filter for HPLC provides precise and reliable filtration of solvents, ensuring optimal performance in high-performance liquid chromatography systems.

Supplier: Bohlender

These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Supplier: ROBU GLASFILTER

ROBU® degassing filter with integrated VitraPOR® filter ensures efficient solvent degassing with inert gases, combined with reliable filtration. Ideal for chromatography and analytical applications, it offers high chemical and thermal resistance.

Supplier: Bohlender

Suction Filter with PTFE membrane.

Supplier: IDEX RHEODYNE

Inlet filters are used to extract particles from the sample between the injector and the column.

Supplier: Sartorius

The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.

Supplier: MICROSOLV

Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.

Supplier: PerkinElmer

Solvent reservoir sparger, Titan, Porestørrelse: 10 µm

Supplier: Restek

This slip-on inlet filter is made of 316 stainless steel tip with a tefzel collar seals to a corrosion-resistant 316 stainless steel filter element.

Supplier: Restek

A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to ¹/₈" Ext.Ø PTFE tubing when finger tightened onto the precision-machined filter holder.

Supplier: Restek

This solvent filter is made up of borosilicate glass and is used to prevent the particulates and microbial growth in the solvents from entering the system.

Supplier: AGILENT HEWLETT PACKARD

It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.