Du søgte efter: Luftprøvetager

Supplier: Merck

Det perforerede prøvehoved kan steriliseres og justeres til horisontale luftmålinger.

Supplier: Merck

The MAS-100 Eco® is a robust and reliable air sampler designed for highest precision.

Supplier: Merck

The MAS-100 NT® Ex combines all the advantages of the MAS-100 NT® but, in addition, has been tested for use in areas where there are explosive atmospheres.

Supplier: Bertin Instruments

Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.

Supplier: Merck

The MAS-100 Iso NT® is a high-performance instrument based on the impaction principle. The head (using standard 90 mm Petri dishes) can be installed at the critical control points with all electronic and moving parts kept outside the critical zone.

Supplier: Merck

The MAS-100 VF® uses standard Petri dishes for monitoring the quality of your environment. Its electronic speed control maintains an accurate flow rate. The handle enables the sampler to be mounted onto an optional tripod, thereby allowing testing at different angles for fixed applications. The perforated lid is the same as on the standard MAS-100® sampler.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: Bertin Instruments

Portable dry air sampler for bio contamination control.

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: VWR Collection

SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: Merck

Several EPA and ASTM methods require a polyurethane foam (PUF) cartridge for monitoring semi-volatiles in stack, ambient, indoor, and workplace atmospheres.

Supplier: Merck

Highest collection efficiency and safety in isolators and rabs with up to four sampling points.

Supplier: Merck

The OSHA Versatile Sampler (OVS) is a unique tube design with the adsorbent and filter combined in one tube for collection of both vapors and aerosols.

Supplier: VWR Collection

The SAS instrument control unit is placed outside and connected to the aspirating head using a simple electrical connection. All possible typical contamination sources from the vacuum sampling system are avoided using the SAS Super Isolator. An interesting application is that several heads can be controlled by a single SAS control unit, providing a practical and economical solution.

Supplier: Sartorius

MD8 air samplers, MD8 airscan and portable AirPort MD8 for detection of airborne microorganisms.

Supplier: VWR Collection

Environmental monitoring in cleanrooms is important and a critical part of the production chain for a manufacturing company.

Supplier: GASTEC

Compact, lightweight, and reliable automatic air sampling pump for GASTEC detector tubes and sorbent tubes.

Supplier: Restek

Sample inlet, 38 mm, Rustfrit stål

Supplier: Restek

These air samplers provide accurate integrated sampling via small fittings that easily connect to miniature canisters.

Supplier: Restek

PUF plugs fits to glass holders as an alternative to pre-cleaned packed cartridges.

Supplier: Restek

It is important to use humidified air or nitrogen to help remove volatile organic contaminants when cleaning SilcoCan® or TO-Can® canisters.

Supplier: Restek

This unique grab sampler minimises connections and leaks and houses a critical orifice in the tee fitting.

Supplier: Restek

These small canisters are designed for controlled sampling, as an alternative to tube and pump samplers.

Supplier: Restek

These grab air samplers are suitable for use with canisters.

Supplier: Restek

These precleaned cartridges are suitable for the air sampling during ambient, indoor and industrial hygiene applications.

Supplier: Restek

These passive air samplers provide accurate integrated sampling without a sampling pump.

Supplier: Restek

For ultimate inertness, SilcoCan air sampling canisters feature our unique Siltek treatment technology. Even highly active components at low parts-per-billion concentrations can be readily sampled and stored without loss. The valve is a high-quality, metal-to-metal seal, 2/3-turn valve with metal diaphragms to prevent sample adsorption for more accurate results. Both stainless-steel and Siltek-treated valves are available in both the 2-port and 3-port configurations. Each canister is slightly pressurised with contaminant-free nitrogen prior to shipment.

Supplier: IUL Instruments SA

Special design of the holes combined with slow rotation of the plate allows using 100% of the surface compared with 5% of the still air sampler device.