Pumper

Supplier: EDWARDS HIGH VACUUM METTLER

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Supplier: SciLabware

Water jet pump suitable for most laboratory water pressures with integrated non-return valve that increases safety and a detachable vacuum connection for 6 to 9 mm bore tubing.

Supplier: Sartorius

The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet transfer pump is ideal for sample filtration in microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. This pump is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

Supplier: schuett-biotec GmbH

The EcoVac safety-vacuum-system supports efficient work and increases the safety standard when working with infectious material in a laboratory.

Supplier: EDWARDS HIGH VACUUM METTLER

Edwards new APG200 series high performance compact pirani gauge is the perfect vacuum measurement solution across a spectrum of applications due to its compact size, LED light ring, integrated set points and flexibility of connections/outputs. 25% reduction in volume compared to the APG100, without any loss in performance. Maximum cable length of 100 m

Supplier: DWK Life Sciences

DURAN®, borosilicate glass 3.3, clear.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Simple brass vacuum/pressure gauge for inclusion in vacuum lines to give coarse vacuum/pressure indication.

Supplier: EDWARDS HIGH VACUUM METTLER

The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10^-9 mbar.

Supplier: GILSON

The VERITY® syringe pumps provide speed and reliability to small- and large-volume, repetitive liquid transfers in HPLC, SPE, and other general liquid handling methods.

Supplier: EDWARDS HIGH VACUUM METTLER

E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

Supplier: NRG DEVELOPMENTS

These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. PP, with PTFE seals.

Supplier: GILSON

Add channels to your MINIPULS® 3 or Evolution and allow even greater flexibility in your laboratory.

Supplier: NRG DEVELOPMENTS

These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. Nylon, with PTFE seals.

Supplier: MURRAY S

Dispensing pump is suitable for lotions, creams and gels.

Supplier: EDWARDS HIGH VACUUM METTLER

Model APG.
These gauges have a measuring range from atmosphere to 1×10⁻⁴ mbar and combine the gauge head and controller in one compact active unit.

Supplier: EDWARDS HIGH VACUUM METTLER

Active Inverted Magnetron gauge is a combined unit of the gauge-head and controller. This gauge operates as a cold cathode ionisation gauge, in which pressure is measured indirectly as a function of the current that flows in a Townsend discharge maintained in the body tube.