Ventiler

Supplier: UPCHURCH SCIENTIFIC

These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Supplier: UPCHURCH SCIENTIFIC

Pressure relief valves are ideal for preventing system over-pressurisation. These products protect system components by diverting fluid flow automatically when inline pressure exceeds the set limit.

Supplier: UPCHURCH SCIENTIFIC

Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, V-101T 3-way flow-switching valve, bulkhead version, 1/16" OD tubing, 1,0 mm thru-hole, 9,7 µl swept volume

Supplier: UPCHURCH SCIENTIFIC

For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Supplier: UPCHURCH SCIENTIFIC

The Quick-Stop Luer check valve assembly is specifically designed to provide inline Luer connect/disconnect convenience while avoiding spills. It is made from biocompatible PEEK with gold-plated stainless steel spring.

Supplier: UPCHURCH SCIENTIFIC

Designed to accurately split and control the low flow stream of a single incoming supply.

Supplier: witeg Labortechnik

Needle valve for burettes, lateral with PTFE plug, 0 - 2,5 mm bore

Supplier: UPCHURCH SCIENTIFIC

Back pressure regulator assemblies are designed to create incremental back pressures ranging from 5 to 1000 psi (0,3 to 69 bar). These biocompatible and stainless steel back pressure regulator assemblies are available complete with a replaceable, factory pre-set cartridge (except the 5 and 20 psi (0,3 to 1,4 bar versions).

Supplier: UPCHURCH SCIENTIFIC

The 6-port medium pressure injection valves feature easy, external sample loop customisation. Simply clean-cut a piece of tubing that represents the volume of sample you wish to inject, taking into account the port-to-port volume of the valve.

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: OMNIFIT

The high pressure manual rotary valves are made from PTFE with a PCTFE rotor with a bore size of 0,8 mm making them ideal for pressure applications up to 500 psi. They are available in four and five port versions. All ports are 1/4"-28 UNF flat-bottom and will accept any 1/4"-28 UNF male fitting. These valves are mountable using the pre-drilled M3 mounting holes.

Supplier: witeg Labortechnik

Spare needle valve, PTFE, red for high vacuum stopcocks WITAFLO, 3 mm hole

Supplier: SciLabware

Designed for use in vacuum lines and fluid handling systems.