Du søgte efter: Gasslanger

Supplier: Bel-Art Products, a Part of SP

HDPE gas dispersion tube. Bell-mouthed fitting with a sealed-in, coarse porosity Fritware® PE disc at the large end.

Supplier: Dräger

To measure the 'spot concentrations' of trichloroethylene in water and waste water for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of cyanide. After carrying out the ten strokes the reagent ampoule must be broken, the liquid transferred onto the white separating layer and carefully drawn through with two strokes in cyanide free air using the pump. The indicating layer must not become moist.

Supplier: Dräger

To measure the 'spot concentrations' of xylene for use with an Accuro® pump. Cross sensitivity: Styrene, vinyl acetate, toluene, ethyl benzene and acetaldehyde are indicated, but with different sensitivities. No interference by:

Supplier: Dräger

To measure the 'spot concentrations' of chlorine for use with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of nitrogen dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of acetone for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: GASTEC

Accessory for gas tube, Holder til Dositube

Supplier: GASTEC

The dositubes are used to measure time-weighted average (TWA) gas concentrations over longer periods.

Supplier: GASTEC

Crystal clear gas tubes with distinct colour changes.

Supplier: Dräger

To measure the 'spot concentrations' of hydrogen fluoride for use with an Accuro® pump.

Supplier: Dräger

Cross sensitivity: Styrene, vinyl acetate, acetaldehyde, acrolein, diesel fuel and furfuryl alcohol are indicated with a yellowish brown discoloration. 500 ppm octane, 5 ppm nitric oxide and 5 ppm nitrogen dioxide have no effect.

Supplier: Dräger

Et bredt udvalg af forskellige gasser og dampe kan påvises og bestemmes. Anvendelse omfatter bestemmelse og måling af koncentrationsspidser, måling af personlig eksponering i indåndingsområdet, lækagepåvisning i fx rør-eller gasinstallationer og luftanalyse i kloaker, skakte og små indelukkede rum.

Supplier: Dräger

To measure the 'spot concentrations' of sulphur dioxide for use with an Accuro® pump.

Supplier: Dräger

Sampling activated tubes for direct measurement indication even with complex compounds and mixtures of substances in air investigations and gas analyses.

Supplier: Dräger

Operating conditions: 0 to 40 °C ; 3 to 15 mg/l H₂O absolute humidity.

Supplier: SciLabware

These Pyrex® borosilicate glass tubes for the dispersion of gas in liquids with sintered thimble allow for the choice of porosities to achieve optimum gas bubble size.