Gasslanger

Supplier: Dräger

To measure the 'spot concentrations' of diesel fuel. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations and air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

The data below is representative for use with an Accuro® pump, a hand operated bellows pump.

Supplier: Dräger

Operating conditions: 0 to 40 °C ; up to 30 mg/l H₂O and for tube 5/a: 3 to 15 mg/l H₂O absolute humidity.

Supplier: Dräger

To measure the 'spot concentrations' of hydrochloric acid in the air with an Accuro® pump - Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Bel-Art Products, a Part of SP

HDPE gas dispersion tube. Bell-mouthed fitting with a sealed-in, coarse porosity Fritware® PE disc at the large end.

Supplier: Dräger

To measure the 'spot concentrations' of ethylene oxide.

Supplier: Dräger

To measure the 'spot concentrations' of phoshine for use with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of trichloroethylene in water and waste water for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of cyanide. After carrying out the ten strokes the reagent ampoule must be broken, the liquid transferred onto the white separating layer and carefully drawn through with two strokes in cyanide free air using the pump. The indicating layer must not become moist.

Supplier: Dräger

Qualitative determination of oxidisable substances including measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of xylene for use with an Accuro® pump. Cross sensitivity: Styrene, vinyl acetate, toluene, ethyl benzene and acetaldehyde are indicated, but with different sensitivities. No interference by:

Supplier: Dräger

To measure the 'spot concentrations' of water vapour for use with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of hydrocarbons with an Accuro® pump.

Supplier: GASTEC

Crystal clear gas tubes with distinct colour changes.

Supplier: GASTEC

The silica gel tube is used in work environments where organic-solvent vapour is collected. Generally the silica gel tube is suited for substances of high polarity (e.g. acetone, methanol, and more).

Supplier: Dräger

To measure the 'spot concentrations' of ammonia including determination of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces. For use with an Accuro® pump. Other basic substances such as organic amines are indicated as well. For Ammonia 2/a, 5/a, 5b, the indication is not affected by :