Låg

Supplier: Thermo Fisher Scientific

PP, hvid, med TPE forseglinger og låg af TPE

Supplier: Bohlender

Silicone ring with double-sided PTFE washer. After assembly, the product is only exposed to PTFE.

Supplier: DWK Life Sciences

PBT, rød, med PTFE-belagte pakninger.

Supplier: Bohlender

PPS-skruelåg, sort, fordelerenhed af PTFE.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.

Supplier: S.C.A.T.

For simple and safe pouring of fluids from containers.

Supplier: Bohlender

Screw cap made of PP-GF or PTFE screw-on piece for various barrel threads, with a freely rotating PTFE insert. Integrated is a measuring lance equipped with a capacitive sensor, fully encapsulated in PTFE, with a permanently attached cable (approximately 0,5 m) for connection to a b.safe Mini-Display Table R659-01 (not included).

Supplier: Bohlender

Screw cap for thread GL 25 made of PPS with rotary elbow fitting with male thread GL 25 and drip edge at female thread GL 25.

Supplier: Bohlender

Screw cap made of PPS for GL 45 thread, free movable insert made of PTFE.

Supplier: DWK Life Sciences

LDPE, coloured.

Supplier: BERLIN PACKAGING RIXIUS GMBH

Screw cap made of black PP with ALU laminated PE foam insert for thread GL 40.

Supplier: Thermo Fisher Scientific

PSF, closures with platinum cured silicone inserts.

Supplier: Bohlender

HPLC-Sets for solvent supply of one HPLC.

Supplier: Thermo Fisher Scientific

Closure, tamper evident, specially designed for use with PET/PETG square media bottles.

Supplier: Thermo Fisher Scientific

Designed to aseptically handle solutions in biopharmaceutical, biotechnology and laboratory liquid transfer applications, these two- and three-ported closures are designed for Thermo Scientific™ Nalgene™ Biotainer™ bottles and carboys. With Animal Derived Component-Free (ADCF) components, including seals that are sonically welded to the cap, and leakproof† closures, security of high value contents are guaranteed during fluid transfer.