Faldbeskyttelse

Supplier: CAPITAL SAFETY

The Protecta® Screw gate carabiner is ideal in working situations where opening is occasional during the working day, as the gate can be opened by pushing it onto the anchorage point. The gate can then be manually locked once the carabiner holds the weight of the device.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: CAPITAL SAFETY

The DBI-SALA® Confined space HC (high capacity) short reach davit system is constructed of powder-coated aluminium, and features a modular design for easy transport and storage. The system is adjustable, providing flexibility during installation.

Supplier: Portwest

The 4 point comfort plus harness has been engineered from lightweight aluminium, optimising strength and durability.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: CAPITAL SAFETY

Protecta® Cabloc® Vertical Lifeline System consists of an 8 mm cable which is terminated at the top by a cable ferrule and cable clamps at the bottom.

Supplier: CAPITAL SAFETY

Nano-Lok™ is compact and ergonomically designed for ease-of-use, and is ideal as a direct connection to most harnesses. Weighing only 725g, it is virtually unnoticeable when worn. It can be used as a lanyard replacement. Locks quickly and stops a fall within centimetres, providing more protection at low heights.

Supplier: CAPITAL SAFETY

Lightweight vinyl construction - ideal alternative to classic bungee tethers.

Supplier: Portwest

Fall Protection is put in place to prevent the risks associated with falling from heights, reducing impact force, restricting obstacle/ground collision and restricting users from fall hazard areas.

Supplier: CAPITAL SAFETY

Protecta® Fixed anchorage plate made from stainless steel.

Supplier: CAPITAL SAFETY

Tripod with adjustable locking legs, safety chains, top pulley and winch bracket.

Supplier: CAPITAL SAFETY

DBI-SALA® Trigger2Trigger lanyard is an economical tethering solution for most hand tools which is most commonly used in combination with DBI-SALA® attachment points. Pull down on the trigger to open the dual-hooked connector, then release once latched to a tool.

Supplier: CAPITAL SAFETY

The Rollgliss R350 system provides efficient hauling, but more importantly, very controlled lowering (a finger and thumb are all that is required to hold a load). This system also allows to change the hauling ratios on the fly with quick release pulleys, allowing custom rigging for different applications and jobsites.

Supplier: CAPITAL SAFETY

PROTECTA® Gear loops are a part of the fall arrest harness accessory options. They provide the opportunity to add extra tool carrying convenience to a harness.

Supplier: CAPITAL SAFETY

D-rings can be attached to virtually any tool under 2,3 kg (5 lbs.) or 0,9 kg (2 lbs.) by using Quick-Wrap Tape.