Du søgte efter: Åndedrætsbeskyttelsessystemer

Supplier: JSP

The Jetstream® Dust Industrial Kit consists of a belt-mounted rechargeable respirator with a large capacity disposable filter supplying clean air through a highly flexible reinforced hose to a grinding visor headtop.

Supplier: JSP

The PowerCap® Active™ is a lightweight positive pressure respirator with eye and face protection, as well as EN812 bumpcap protection. Designed to protect the user from dust and most airborne particulate pollutants to EN12941 TH1P.

Supplier: 3M

3M™ Versaflo™ S-400 series integrated suspension hood is a head cover with integrated head suspension which provides head, face, neck, and shoulder coverage. The hood can be used with 3M™ powered air respirators and supplied air respirator systems in a wide variety of applications.

Supplier: JSP

A fully integrated TH3 powered air respirator offering four of the highest levels of protection in one intuitive head-mounted unit. The system provides complete above the neck 4-in-1 protection; respiratory, head, eye, and face.

Supplier: 3M

Versaflo™ Visor Pivot Kit M-960 is a replacement part designed for use with 3M™ Versaflo™ M-Series Headtops.

Supplier: 3M

The Adflo™ Powered air purifying respirator system with 3M™ Speedglas™ G5-01 series Welding helmet provides all of the benefits of the G5-01 series welding helmet with a convenient Adflo™ Powered air purifying respirator system.

Supplier: JSP

Dust and half masks commonly fail to do the job they are intended to do because of poor fitting and care by the user. Qualitative Fit Testing can be used not only as a test method to ensure wearers are properly protected, but also as a very effective way of training them in the correct way of fitting a mask.

Supplier: JSP

Jetstream® is a belt-mounted rechargeable respirator with a large capacity disposable dust filter. Jetstream® delivers 180 L/min. of air through the filter via a highly flexible hose to the desired headtop.

Supplier: 3M

The Versaflo™ Backpack Adaptor TR-655 allows users to wear Versaflo™ Powered Air Turbo TR-600 or TR-800 unit on their back when used with Versaflo™ Backpack Harness BPK-01.

Supplier: 3M

The Versaflo™ Filter Cover TR-371+ is a replacement filter cover for use with Versaflo™ Powered Air Turbo TR-300+.

Supplier: 3M

The TR-819E starter kit for the Intrinsically Safe (IS) powered air purifying respirator comes ready to use and includes everything needed for immediate use.

Supplier: 3M

The Versaflo™ Cleaning and Storage Kit TR-653 is designed to assist with safely cleaning and storing the Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It comes with one inlet plug and two inlet seals, one outlet plug and two outlet seals, and one battery connector cover.

Supplier: 3M

The Versaflo™ Forehead Comfort Pads are designed for use with Versaflo™ S-Series head covers and hoods.

Supplier: 3M

The Versaflo™ powered air Turbo TR-600 is a belt-mounted air purifying device. When combined with one of the 3M approved helmets, it forms a power-assisted system for respiratory protection against particles, nuisance odours (where applicable) and gases and vapours.

Supplier: 3M

The Versaflo™ Breathing Tube Radiant Heat Cover BT-927 is a radiant heat-resistant, highly durable breathing tube cover for 3M™ Versaflo™ BT-Series Breathing Tubes.

Supplier: 3M

Versaflo™ M-300 Series helmets offer respiratory, eye and face protection. In addition they incorporate head protection, essential for areas where hard hats are mandatory (e.g. construction sites).

Supplier: 3M

The TR-970 Air Flow Indicator is used to confirm that the manufacturer's minimum design flow rate of the Versaflo™ TR-300 Series Powered Air Turbo is exceeded.

Supplier: 3M

Versaflo™ S Series Peel-Off Visor Covers are transparent, peel-off visor covers designed for use with Versaflo™ Series S-133, S-333, S-433, and S-533 head covers and hoods. This self-adhesive cover protects the visor from contaminants and scratches.

Supplier: 3M

The Versaflo™ Peel-Off Visor Cover for Premium Hoods is a transparent peel-off visor cover designed for use with Versaflo™ Series S-600, S-700, and S-800 premium head covers and hoods.

Supplier: 3M

The Versaflo™ Over-Visor Frame M-961 is a carrier frame designed to fit Versaflo™ Over-Visor M-967 and Versaflo™ radiant heat covers for Versaflo™ M-Series Helmets.

Supplier: 3M

Versaflo™ M-400 Series helmets with shrouds offer protection from a range of respiratory, head, eye and face hazards.

Supplier: 3M

The Versaflo™ coated visor M-927 is a clear, polycarbonate replacement visor designed for use with 3M™ Versaflo™ M-Series Headtops.

Supplier: 3M

3M™ S-seriens hovedbeskyttelser tilbyder ansigts- og hovedbeskyttelse såvel som øje- og ansigtsværn mod væskesprøjt og slag med lav energi (niveau F). De er velegnede til applikationer, som kræver hyppig udskiftning af hele hovedbeklædningssættet, som fx i farmaceutisk produktion og laboratoriearbejde, eller i situationer, hvor der er mindre tilsmudsning af det ydre stoflag. Alle hovedbeskyttelser kan anvendes sammen med 3M turbo- og luftforsynede systemer (fx. Jupiter™ og Dustmaster™), og kan sammen fungere som åndedrætsværn.

Supplier: 3M

The balanced and compact 3M™ Versaflo™ TR-300+ is an easy-to-use, versatile respirator system for particulate environments.

Supplier: 3M

Versaflo™ S-series hoods and headcovers feature adjustable suspensions (most models) and soft comfort pads that provide excellent fit, stability and tracking.

Supplier: 3M

Versaflo™ Spark Arrestor TR-362 is an accessory designed to protect the filter and turbo in Versaflo™ Powered Air Turbo TR-300+.

Supplier: 3M

Aircare™ Filtration Units provide high-quality air from an external source. Removing water and oil droplets, solid particles, and odors, as well as condensation and contaminants from facility supplied compressed air, air is filtered for up to three users operating any 3M™ Supplied Air Respirator Systems.

Supplier: 3M

These Versaflo™ Radiant Heat Covers are made from lightweight, aluminised aramid fabric and provide improved head, neck, and shoulder protection and comfort from radiant heat. The covers are designed for use with Versaflo™ helmets M-307 and M-407.

Supplier: 3M

The 3M™ S-200+ supplied air respirator system is a comfortable and versatile supplied air respirator system for use with the 3M™ 6000 and 3M™ 7000 Series half and full face masks. Ideal for applications like spray painting, glass fibre fabrication, powder coating, material handling.

Supplier: 3M

The Versaflo™ Heavy Duty Shroud M-448 is a high durability shroud for 3M™ Versaflo™ M-400 helmets. A 3M™ Versaflo™ Inner Collar (M-444) must be zipped into the outer shroud before use.