Du søgte efter: Sprøjter til kromatografi

Supplier: Trajan Scientific and Medical

Diamond MS syringes are designed to improve the sensitivity of your MS analysis.

Supplier: Trajan Scientific and Medical

Sprøjte, til kromatografi, HPLC, With PTFE-tipped plunger, 1/4-28 UNF front thread, 250D-WISP, Volumen: 250 µl, Til: Waters instruments, Pakn: 1

Supplier: VWR Collection

Standard micro syringes for GC with fixed needle.

Supplier: Trajan Scientific and Medical

These are plunger-in-barrel syringes. Each plunger is individually fitted for each microsyringe for perfect sealing.

Supplier: Trajan Scientific and Medical

These dispenser and pump syringes incorporated with Diamond technology have been designed and manufactured for a variety of instruments and customer applications.

Supplier: Trajan Scientific and Medical

Sprøjte, til kromatografi, HPLC, Gas-tight, with M10 - 1,0 screw thread termination, 500C-HITACHI, Volumen: 500 µl, Til: L7200/7250, AS1000/2000/4000 LC, Pakn: 1

Supplier: Trajan Scientific and Medical

On-column syringes are suitable for general purpose applications.

Supplier: Trajan Scientific and Medical

Sprøjte, til kromatografi, GC, 250R-GT-LC, Volumen: 250 µl, Spidstype: LC, Måler: 22, Længde: 51 mm, Ø udv.: 0,028" mm, Pakn: 1

Supplier: Trajan Scientific and Medical

These syringes are pre-fitted with valves. They are ideal for sample storage and transportation or to pressurise samples prior to injection.

Supplier: Trajan Scientific and Medical

Sprøjte, til kromatografi, HPLC, Gas-tight, with PTFE-tipped plunger, 1/4-28 UNF front thread, 250D-SPARK-GT, Volumen: 250 µl, Til: Spark Holland Promis LC autosampler, Pakn: 1

Supplier: Trajan Scientific and Medical

* gastæt

Supplier: Trajan Scientific and Medical

These syringes are made from borosilicate glass. They are used as a replacement for pump syringes.

Supplier: Trajan Scientific and Medical

The comprehensive range of L-MARK® Gold and L-MARK syringes for LC systems are designed and tested to meet critical instrument parameters.

Supplier: Trajan Scientific and Medical

These syringes are made from borosilicate glass. They are used as replacement for C and CX syringes.

Supplier: Trajan Scientific and Medical

These syringes are ideal for calibration of medical equipment such as respirators and spirometers, and for stack and air sampling.

Supplier: Trajan Scientific and Medical

Sprøjte, til kromatografi, HPLC, Gas-tight, with PTFE-tipped plunger, 1/4-28 UNF front thread, 250C-THERMOSPEC, Volumen: 250 µl, Til: AS100/300 and AS1000/3000/3500 LC autosamplers, Pakn: 1

Supplier: HAMILTON BONADUZ

The 600 series syringes are a half stroke version of the original 700 series syringes. This series of syringes is ideal for dispensing volumes from 0,25 μl up to 5 μl. The 600 series is often used in applications that require one handed operation because of the short stroke length and the reinforced plunger.

Supplier: HAMILTON BONADUZ

The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: HAMILTON BONADUZ

These syringes are used for GC autosamplers.

Supplier: HAMILTON BONADUZ

Sprøjte, til kromatografi, Microliter™, HPLC/GC, 1001 LTNCH, Volumen: 1 µl, Måler: 22, Længde: 51 mm, Pakn: 1

Supplier: HAMILTON BONADUZ

The needle points of these thin layer chromatography syringes are covered with a PTFE coating which reduces the surface tension between the needle and the liquid making it ideal for reproducible sample spotting.

Supplier: HAMILTON BONADUZ

These gas tight syringe are designed for HPLC autosamplers.

Supplier: HAMILTON BONADUZ

This line of syringes developed for Spark Holland HPLC autosamplers offer everything required of an instrument syringe: chemical inertness, long life, reduced friction, precision and accuracy.

Supplier: HAMILTON BONADUZ

The syringe guide comes with a syringe installed from the factory. This eliminates the assembly step which can lead to damage of the smaller volume syringes. This is especially critical for 7000 series syringes which have extremely small plunger wires.

Supplier: HAMILTON BONADUZ

Developed specifically for the neurosciences, these syringes minimise injection site damage by increasing needle rigidity and delivering a micro volume of liquid to an exact location.

Supplier: HAMILTON BONADUZ

Sprøjte, til kromatografi, TLL-SAL calibrated, Volumen: 250 µl, Pakn: 1

Supplier: HAMILTON BONADUZ

CTC PAL® autosamplers are able to sample from many different vial and well types and have ultimate platform flexibility. The syringe is the most important part of every injection that the HPLC PAL® system performs. These autosampler syringes are specially designed for use in these HPLC PAL® systems: PAL® HTC-xt, PAL® HTS-xt, PAL® HTX-xt sold under the following brands: AB Sciex, Agilent, Alpha M.O.S., Antek, Bruker, Dionex, GE, Gerstel, GL Sciences, Lauda, LEAP Technologies, MicroCal, MPS, Perichrom, PerkinElmer, Shimadzu, Sotax, Thermo Scientific, Waters and Zoex.

Supplier: Thermo Fisher Scientific

These HPLC syringes are standard fixed needle syringes for Rheodyne/Valco™ injectors.

Supplier: HAMILTON BONADUZ

The Digital Syringe™ is a calibrated device composed of a serialised syringe and a serialised digital electronic holder.

Supplier: HAMILTON BONADUZ

Syringes are designed and tested to meet critical autosampler performance needs.