Du søgte efter: Kromatografi reservedele
Injection port supplies for Agilent GCs
Supplier: Restek
Heater block, Til: Agilent 6850/6890/7890 GC split/splitless injector
Expand 14 Items
Carriage motor belt
Supplier: Restek
Carriage motor belt for Agilent 7673A, 7673B and 7673C autosamplers.
Expand 1 Items
FID capillary column adapters
Supplier: Restek
These FID capillary column adapters made of stainless steel are ideal for PerkinElmer Auto SYS XL.
Expand 2 Items
Methane cylinder kit for GC
Supplier: Restek
Set the column flow rate by injection the methane and optimising linear velocity is preferred method for establishing reproducible retention times.
Expand 1 Items
Trident direct guard cartridge system
Supplier: Restek
Trident direct system can be used to select the right level of protection for analysis. It provides the protection against particulate matter and moderate protection against irreversibly adsorbed compounds.
Expand 5 Items
Installation kits for micropacked columns
Supplier: Restek
Installation kit for 1 mm ID columns; for direct injections, Kit contains 2× stainless steel nuts 1,58 mm, 2× Vespel/graphite ferrules 1,58 mm, 2× graphite ferrules 1,58 mm, 2× stainless steel front ferrules 1,58 mm, 2× stainless steel back ferrules 1,58 mm
Expand 2 Items
Miscellaneous supplies for ICP-OES
Supplier: VARIAN
ICP-OES supplies and accessories help you maintain the superior performance of your ICP-OES System.
Expand 1 Items
Vedligeholdelsessæt
Supplier: DOMNICK HUNTER
Vedligeholdelsessæt, 4000 timer, til alle LCMS
Expand 2 Items
SPME fibers
Supplier: VARIAN
SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.
Expand 1 Items
Supplies for Agilent Instruments
Supplier: VARIAN
Quartz vaporizer tube O-ring
Expand 5 Items
Universal replacement parts, Omnifit®
Supplier: OMNIFIT
Universal replacement parts for all Omnifit® labware columns which gives complete flexibility to replace lost or worn parts. Compatible with BenchMark, SolventPlus and HiT column ranges.
Expand 21 Items
Accessories for sample loops
Supplier: Thermo Fisher Scientific
Replacement rotor
Expand 1 Items
Gas line supplies
Supplier: AGILENT HEWLETT PACKARD
These gas line supplies add stability and functionality to even the most basic ICP-MS System calibrations.
Expand 1 Items
RheBuild® kits for injection valves
Supplier: VARIAN
RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products. RheBuild® kits eliminate the need to order individual parts.
Expand 2 Items
Seal kit for liquid head pump
Supplier: VARIAN
Seal kits are available in various capacity based on the pump head sizes.
Expand 1 Items
Mark 7 spray chamber supplies
Supplier: VARIAN
Mark 7 Spray Chambers for flame atomisation System. Easy-to-use twist and lock assembly allows for easy cleaning and routine maintenance.
Expand 2 Items
Supplies for markes thermal desorption
Supplier: VARIAN
Cold trap, air toxics, C2-C14, unity 2
Expand 11 Items
Nitrogen phosphorus detector (NPD) supplies for 7890/6890/6850
Supplier: AGILENT HEWLETT PACKARD
Insulator, NPD upper
Expand 5 Items
Supplies for pumps
Supplier: AGILENT HEWLETT PACKARD
Seal keeper, Til: 1100/1200/1200 RRLC and 1120 pumps
Expand 1 Items
ISIS supplies for 7500
Supplier: AGILENT HEWLETT PACKARD
High quality supplies and components for the Integrated Sample Introduction System (ISIS) for use with the 7500 ICP-MS range.
Expand 8 Items
Peristaltic pump tubing and sample line supplies
Supplier: AGILENT HEWLETT PACKARD
The peristaltic pump tubing has to be washed prior to use. The common way is to run about 5% HNO₃ (v/v) solution.
Expand 3 Items
Archon purge and trap supplies
Supplier: VARIAN
Sparge probe replacement kit, for S/N 995-13160, hexagonal base
Expand 3 Items
Tubing expander, Upchruch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.
Expand 1 Items
Supplies for solvent delivery system
Supplier: AGILENT HEWLETT PACKARD
Solvent capillary
Expand 1 Items
Annual service kit for nitrogen generators, Peak Scientific
Supplier: PEAK SCIENTIFIC
Annual service kit for Genius NM32LA, 1022, 1023
Expand 1 Items
Graphite tubes and platforms
Supplier: VARIAN
Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.
Expand 3 Items
Spray chambers and brackets
Supplier: VARIAN
These ICP-OES series are compatible with a range of accessories and supplies designed to extend the capabilities of the instruments.
Expand 1 Items
Solid phase microextraction fibers
Supplier: VARIAN
Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.