Du søgte efter: Kromatografi reservedele

Supplier: Restek

The UHP pulse dampener made up of stainless steel fluid path.

Supplier: Restek

These kits are used for start-up and maintenance in all HPLC systems.

Supplier: Restek

Face seals replacement kit, Til: 2690, 2695, 2790, 2795

Supplier: Restek

Uniliner® liners must be used with a Uniliner® liner adaptor for ¹/₄" injection ports.

Supplier: Restek

Packed column inlet adapter kits center columns perfectly in 6,35 mm injection ports to eliminate bent syringe needles.

Supplier: Restek

These injector adapters made of stainless steel are ideal for PerkinElmer CAP injector.

Supplier: Restek

This reservoir kit is used to restore the performance of bonded-phase capillary columns by dissolving and removing soluble, nonvolatile residue. The rinsing reservoir is equipped with 6,4 mm inlet and outlet connections and includes a built-in fritted disk to prevent particulate matter from contaminating the column.

Supplier: Restek

Replacement parts for Shimadzu HPLC systems.

Supplier: Restek

Frit adaptors

Supplier: Restek

A complete column packing system which is used to pack the analytical HPLC columns.

Supplier: VARIAN

Load and Lock 4003 column, spare parts kit

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890/7890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.

Supplier: Restek

Z-Belt for use with Agilent 7673B and 7683 autosamplers.

Supplier: Restek

This kit contains the tubing and fittings needed to add an additional GC to lab bench.

Supplier: Restek

Flow splitters with fluid resistor technology eliminate the adjustments to the capillary tubing for optimising split ratio with wide range of interchangeable resistors.

Supplier: Restek

Injector mounting post for Agilent 7673 series autosamplers, for use with 6890 GCs

Supplier: Restek

This easy to use adapter fitting is sturdy and made of compact stainless steel.

Supplier: Restek

FID/NPD capillary adapter fitting, high-quality stainless steel, for Agilent 5890/6850/6890 GC's

Supplier: Restek

Autosampler plunger carrier belt for Agilent 7673A and 7673B autosamplers.

Supplier: Restek

These preventive maintenance (PM) kits are suitable for Waters HPLC and ACQUITY UPLC Systems.

Supplier: Restek

Standard pump seal kit, Til: 200 series

Supplier: Restek

The PAL SPME manual injection kit is designed to house SPME arrows and traditional SPME fibers during extraction and injection steps.

Supplier: Restek

This Siltek® treated septum packed purge port weldment for Agilent 5890 GC makes weldment inert and eliminates adsorption of sensitive compounds such as, DDT and Endrin.

Supplier: Restek

Used to withdraw sample from a high-pressure cylinder after pressure reduction through the high-purity VOC single-stage regulator.

Supplier: Restek

This air diverter diverts GC exhaust heat up and away from the lab bench.

Supplier: Restek

Replacement parts for Shimadzu HPLC systems.

Supplier: Restek

This heater cartridge and PRT sensor can be used with 5890 FID and split/splitless weldments.

Supplier: Restek

This kit is used exclusively with Agilent 5890 GCs.

Supplier: Restek

Caps features a smooth inner surfaces for easier cleaning. Suitable for for ASE systems.

Supplier: Restek

This split/splitless injection port changes inlet liners faster and more easily.