Supplier: Avantor

Standard cutter for 1/16" and 1/8" O.D. tubing.

Supplier: Merck

ORBO™, Tube cutter for ORBO™ tubes

Supplier: Avantor

Stainless steel cutters are specifically designed for ¹/₁₆" stainless steel tubing.

Supplier: Trajan Scientific and Medical

Cutter for steel tubing.

Supplier: Avantor

The Clean-cut™ cutter is designed specifically for cutting polymeric HPLC tubing from 1/16” to 1/8” with no distortion of cross-section and without closing the bore.

Supplier: BURKLE

Edges cut with this tubing cutter are always clean and flat, even in the case of thick tubing.

Supplier: RSG

Plastic handle with hardened metal blade.

Supplier: Trajan Scientific and Medical

The capillary cutting tool is used for burr free cutting of fused silica tubing.

Supplier: BOCHEM

Brass, nickel-plated with hard-metal wheel.

Supplier: S.C.A.T.

This cutter is made of PP, blue, with stainless steel blade.

Supplier: BOCHEM

Plastic handle with hardened metal blade.

Supplier: Bohlender

Ideal for cutting capillaries and elastic tubes without reinforcement.

Supplier: ENTEGRIS

These handheld tube cutters are easy to use and provide a clean, straight cut.

Supplier: Bohlender

Ideal for cutting plastic and rubber tubing with and without textile reinforcement.

Supplier: Thermo Fisher Scientific

This ceramic column cutter can be used to cut GC columns.

Supplier: Thermo Fisher Scientific

Tubing cutter cuts ¹/₈" stainless steel tubing.

Supplier: MARTOR ARGENTAX

The SCRAPEX 596 is the largest scraper used for effortless removal of stickers, labels and other paper, colour and paint residue on all smooth surfaces. It can work especially effectively with the 100 mm long blade. This professional tool also convinces with a non-slip handle and the built-in safeguard.

Supplier: Industrial Physics

These scratching tools can perform a Machu corrosion test. Each tool is provided with a 1 mm width cutter to cut the coating down to the metal.

Supplier: Thermo Fisher Scientific

This capillary column cutter can be used to cut GC columns.

Supplier: MARTOR ARGENTAX

The ARGENTAX RAPID has found its purpose: silicon cartridges. It has two blades to deal with them. One small pointed one, that you can use to scratch and cut open the plug. And a rectangular one which caps the spout opening like a guillotine according to the thickness you require.

Supplier: USBECK Laborgeräte

Plastic handle with hardened metal blade.

Supplier: USBECK Laborgeräte

Zinc diecast, nickel-plated with steel wheel.

Supplier: CAMAG

Et instrument til nøjagtig udskæring af TLC/HPTLC-plader, som ofte anvendes i metodeudvikling og præ-tests. smartCut kan skære igennem glasplader, som er op til 3 mm tykke, uden at beskadige det følsomme lag.

Supplier: PerkinElmer

Ceramic wafer scribe is inexpensive and ideal for cutting polyimide fused silica capillary columns and guard columns.

Supplier: Cytiva

Tubing cutter for easy cutting of tubing for ÄKTA systems.

Supplier: KNAUER

Capillary cutter for PEEK capillaries and tubings with an outer diameter of up to 4 mm.

Supplier: Restek

This sapphire scribe cuts fused silica tubing.

Supplier: Restek

This capillary GC column cutter can be used with 0,25 to 0,53 mm inner diameter and max. 0,78 mm outer diameter tubings.

Supplier: Restek

This tubing cutter provides burr-free, perpendicular cuts that will not distort the tubing O.D. or close the I.D.

Supplier: Bel-Art Products, a Part of SP

Portable, pocket-sized cutter cuts flexible tubing from 1,6 to 19 mm Ø.