Du søgte efter: Elektroder

Supplier: EUTECH

Eutech™, Replacement sensor for Eutech™ Elite ORP tester

Supplier: EUTECH

General purpose plastic-body ORP electrode for use with all pH meters with BNC input connector.

Supplier: FOURIER SYSTEMS

Approximately 65 sensors available for MultiLogPRO/Nova 5000/USBLink. See below for examples. Please visit www.fourier-sys.com for more detailed information.

Supplier: Thermo Orion

These ORP electrodes combine a platinum redox sensing electrode and a silver/silver chloride reference electrode in one body.

Supplier: WTW ONLINE

This system – consisting of a robust, digital armature with ammonium replacement electrode and ammonium reference electrode – allows ammonium measurement directly in the medium, without sample preparation. The system is designed for connection to the IQ SENSOR NET multiparameter measuring system.

Supplier: WTW ONLINE

The SensoLyt® measuring chains with arming are easy to install and boast flexible measuring and application areas. Eletrodes without arming can be connected directly to a pH monitor of the EcoLine® or QuadroLine® series. Depending on the application, they can be installed into a flow vessel.

Supplier: CONSORT

Elektrode, pH, SP21X, pH: 0 - 14, 0...+100 °C, Glas, Membran: Single junction, Elektrolyt: Refillable, Ø×L: 12×110 mm, S7, Til: General purposes

Supplier: Cole-Parmer

Combined electrodes for use with Jenway ion meters.

Supplier: Cole-Parmer

A variety of pH electrodes for your Jewnay meters.

Supplier: METROHM

Surfactant electrodes for two-phase titration.

Supplier: CONSORT

Elektrode, pH, SP21B, single junction, refillable, pH: 0 - 14, 0...+100 °C, Glas, Ø×L: 12×110 mm, BNC, 1 m kabel, Til: Laboratory use, research, production, education, agriculture

Supplier: Endress+Hauser

Compact conductivity system for hygienic applications.

Supplier: CONSORT

These combination electrodes have an epoxy body.

Supplier: Hanna

These pH electrodes are suitable for measuring the pH value in different types of food.

Supplier: Cole-Parmer

Jenway has an extensive range of dissolved oxygen probes suitable for portable or bench dissolved oxygen meters.

Supplier: Lovibond

Combined pH/temperature electrode with temperature sensor NTC 30 kOhm and BNC connection.

Supplier: CONSORT

Elektrode, pH, SP23Y, pH: 0 - 14, +5...+110 °C, Glas, Membran: Double junction, Elektrolyt: Sealed, Ø×L: 12×110 mm, S8, Til: Alkaline solutions, high temperature fluids, photo baths, ink

Supplier: METROHM

Three-conductor conductivity measuring cell with cell constant c = 1,6 cm^-1 (guide value).

Supplier: WTW ONLINE

Elektrode, opløst ilt, Ecoline, TriOxmatic® 690-7, 0 - 60 mg/l; 0 - 600%, 196 mm, 7 m cable, with watertight plug (IP65)

Supplier: Cole-Parmer

Elektrode, pH, Combination pH electrode, bulb, pH: 1 - 14, 0...+80 °C, Glas, Membran: Annular ceramic, Elektrolyt: 4.0M KCl/AgCl (refillable), Ø×L: 12×350 mm, BNC, 1 m cable, Til: Measurements in large flasks

Supplier: WTW ONLINE

With the NitraLyt® Plus 700 IQ, nitrate can be determined directly in the medium. This makes measured values available in a timely manner and they can easily be used for regulation purposes.

Supplier: CONSORT

A range of conductivity electrodes for different applications.

Supplier: Greisinger

Redox electrode with BNC plug.

Supplier: Cole-Parmer

Cells for conductivity measurement.

Supplier: Cole-Parmer

This probe is manufactured from PVC and stainless steel and is designed for the measurement of purified water.

Supplier: WTW ONLINE

In-situ combination sensor for direct measurements of ammonium and nitrate using only one sensor. Designed for the installation of a measuring electrode, a reference electrode and a compensation electrode.

Supplier: WTW ONLINE

A fluorescence optical method that delivers higher accuracy and better resolution measurement than by electrochemical methods. Intelligent membrane with IQMC technology means each membrane is individually calibrated and data stored in a memo chip permanently fixed to the membrane.

Supplier: WTW ONLINE

The special design of the process line electrodes makes them close to optimal in their accuracy, stability, speed and longevity to liquid electrolyte electrodes. For the use in pipelines, they can be installed into the replacement fitting CHEMtrac 830 M.

Supplier: Cole-Parmer

These electrodes with epoxy body are ideal for the measurement of food extracts.

Supplier: CONSORT

General purpose conductivity electrode for measuring low and medium coductivities.