Elektroder

Supplier: Mettler - Toledo

DES® digital sensors are a smart choice. Retaining the measurement electronics and only replacing the sensor shaft at the end of its life, or the detachable cable that can be used for all sensors, helps reduce material waste and thus, the ecological footprint.

Supplier: Hach

IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The probe is available in either a standard or a rugged version.

Supplier: Hach

These digital combination electrodes feature a built-in temperature sensor and are either refillable or non refillable. They can be used with all Hach HQd™ meters.

Supplier: Hach

The 5044 with lithium acetate electrolyte is recommended for use with all sensION+ half-cell ion selective electrodes (ISE) in drinking water, wastewater and general water quality applications.

Supplier: Mettler - Toledo

DES® digital sensors are a smart choice. Retaining the measurement electronics and only replacing the sensor shaft at the end of its life, or the detachable cable that can be used for all sensors, helps reduce material waste and thus, the ecological footprint.

Supplier: SI Analytics

Elektrode, pH, H 64, pH: 0 - 14, 0...+100 °C, Glas, Membran: Ground joint, Elektrolyt: KCl 3 mol/l, Ø×L: 12×170 mm, Plug head

Supplier: SI Analytics

Elektrode, opløst ilt, Ox 1113T, −5...+45 °C, Ø×L: 12×120 mm, 1 m fixed cable with 8-pole plug

Supplier: Thermo Orion

Protect electrodes from breakage when not in use with the Thermo Scientific™ Orion™ electrode storage sleeve and base.

Supplier: Thermo Orion

These chloride electrodes are designed for measuring free chloride in the range of 1×10⁻⁵ to 1 M.

Supplier: Hach

The Radiometer GK2401C combination pH electrode has a glass body, Red-Rod reference system, refillable electrolyte (saturated KCl) and Radiometer Type 7 connector for compatibility with Radiometer MeterLab legacy meters.

Supplier: Mettler - Toledo

Metal half-cells for Redox/ORP applications.

Supplier: HAMILTON BONADUZ

These electrochemical oxygen sensors are ideal for applications with high demands for hygiene, e.g. in pharmaceutical industry, in biotechnology and in foods & beverages production. The sensors are equipped with a FDA approved membrane for usage in hygienic processes. They can withstand steam sterilisation, autoclavation and CIP cleanings.

Supplier: Thermo Orion

This half-cell electrode is ideal for performing quick, accurate and economical measurements of thiocyanate ions in aqueous solutions.

Supplier: Mettler - Toledo

These conductivity probes with integrated temperature sensor (NTC 30 kΩ) are suitable for different sample types. They all provide automatic temperature compensation.

Supplier: Mettler - Toledo

Elektrode, opløst ilt, LE621 (IP 67), galvanic, with NTC30 KΩ, 0 - 200%, 0 - 20 mg/l, 0...+50 °C, Ø×L: 12×120 mm, BNC/Cinch, 1 m cable

Supplier: Hach

Digital combination ORP/Redox probes with built-in temperature sensor. Ideal for measuring absolute mV values in wastewater, drinking water and general applications.