Du søgte efter: Sikkerhedslåg og sikkerhedsaffaldslåg

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

Screw cap for thread GL 25 made of PPS with rotary elbow fitting with male thread GL 25 and drip edge at female thread GL 25.

Supplier: S.C.A.T.

For simple and safe pouring of fluids from containers.

Supplier: Bohlender

Screw cap made of PPS for GL 45 thread, free movable insert made of PTFE.

Supplier: Brand

PP caps, PE seal, DE-M marking.

Supplier: RIXIUS

Tamper-evident closure HDPE RD 61

Supplier: Thermo Orion

These membrane caps help to reduce probe servicing time and eliminate assembly problems. Convenient screw-on membrane caps help ensure optimal probe performance.

Supplier: Corning

Transfer cap for optimum growth with with ¹/₄" Barb connection.

Supplier: Corning

Overføringslåg med to porte. En port ender i en 0,2 µm 50 mm skive og den anden port er en C-Flex-slange, som ender i enten en luer lock (han) eller en quick-fitting af polycarbonat (han).

Supplier: BURKLE

Screw-on closure with tamper-evident ring for compact jerrycan.

Supplier: RIXIUS

Screw lids made of white coloured plastic PP.

Supplier: Restek

Membrane Filters, nylon, 47 mm, 0,22 μm

Supplier: Restek

Opti-Cap adaptor

Supplier: VICI JOUR RESEARCH

These waste caps include three or four ports for ¹/₈ and ¹/₁₆" tubing. Two versions of each waste cap are available, with an extra port to accommodate either a 1/2-20 port for ¹/₄" O.Ø tubing, or a barbed hose adapter.

Supplier: VICI JOUR RESEARCH

The Eco Cap consists of a three-hole ETFE insert with a polyethylene collar.

Supplier: hünersdorff GmbH

Made of fracture-proof and food-safe polyethylene with sleeve connection for a hose.

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: VICI JOUR RESEARCH

DIN50 safety caps seal to the bottle/canister with an O-ring behind a PTFE lip, so the O-ring is therefore not a wetted part. Unused ports can be closed with the stopcock.

Supplier: VICI JOUR RESEARCH

These caps top bottles are available with two, three, or four colour-coded 1/4-28 thread for ¹/₈ or ¹/₁₆" O.Ø tubing.

Supplier: VICI JOUR RESEARCH

This cap can be used for helium sparging and for delivering HPLC mobile phases. The tubing ports are made so that you push the tubing through the hole, while 1/4-28 fittings provide the best connection. Unused ports can be plugged as required.

Supplier: VICI JOUR RESEARCH

GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.