Du søgte efter: Incubators

Supplier: VWR Collection

These compressor-cooled incubators with forced air convection provide a temperature range between 3 to 70 °C. Featuring a stainless steel (DIN 1.4016) inner chamber and powder coated sheet exterior. These models have an intuitive menu, USB interface for data download to USB stick, and can be connected to LAN network. The IL 68R has an external glass door, the IL 150R/250R models have a solid outer door and internal glass door.

Supplier: VWR Collection

The INCU-Line® Tower is a general purpose, dual-chamber, cooled incubator with natural convection. This digitally cooled incubator with Peltier technology offers an economical, space saving solution for microbiology applications at below room temperature. The built-in Peltier element has low energy consumption (only 35 W at 37 °C), and ensures temperature stability and uniformity over the entire temperature range.

Supplier: VWR Collection

These compressor cooled incubators with forced air convection feature a stainless steel inner chamber and a powder coated sheet exterior. The IL 68R has an external glass door, the IL 150R/250R models have a solid outer door and internal glass door. All models have an internal LED light, 30 mm access port, real time clock, internal electrical socket, internal memory (up to 2046 data records) and USB interface (at rear) for downloading data to a PC.

Supplier: VWR Collection

The IL 23R digital cooled incubator with Peltier technology offers an economical and space saving solution for microbiology applications at below room temperature. The temperature can be freely adjusted in increments of 0,1 °C from 10 °C below ambient up to a maximum of 50 °C. The built-in Peltier element has a low energy consumption and ensures temperature stability and uniformity over the complete temperature range. The transparent Plexiglas® window allows full visibility of the samples inside the incubator. The housing is constructed entirely of epoxy coated mild steel.

Supplier: VWR Collection

These compressor-cooled incubators provide a temperature range between –10 to +100 °C with forced air convection and fan speed control (10 to 100%). Featuring a stainless steel (DIN 1.4301) inner chamber and a powder coated sheet exterior. PREMIUM models have an intuitive menu and user friendly software, USB port with flash drive for data download to USB stick and for uploading programs. They can be connected to Ethernet or Wi-Fi network for remote control from any computer and users can receive notifications about selectable parameters via e-mail.

Supplier: VWR Collection

These compressor-cooled incubators provide a temperature range between 3 to 70 °C with forced air convection and fan speed control (50 to 100%). Featuring a stainless steel (DIN 1.4016) inner chamber and stainless steel linen finish exterior. The PREMIUM models have an intuitive menu and user friendly software, USB port with flash drive for data download to USB stick and for uploading programs. They can be connected to Ethernet or Wi-Fi networks for remote control from any computer, and users can receive notifications about selectable parameters via e-mail.

Supplier: VWR Collection

These compressor-cooled incubators provide a temperature range between 3 to 70 °C with forced air convection and fan speed control (50 to 100%). Featuring a stainless steel (DIN 1.4016) inner chamber and stainless-steel linen finish exterior. The PREMIUM models have an intuitive menu and user-friendly software, USB port with flash drive for data download to USB stick and for uploading programs. They can be connected to Ethernet or Wi-Fi networks for remote control from any computer, and users can receive notifications about selectable parameters via e-mail.

Supplier: VWR Collection

Cooled incubators with Peltier technology feature excellent temperature stability and uniformity. They are energy efficient and environmentally friendly, with a low noise level, and they work almost vibration-free as no compressor is installed. No dehumidification of samples due to the closed chamber. These models, with forced air convection, provide a temperature range between 0 to +70 °C (max. 20 °C below ambient) and feature a stainless steel (DIN 1.4301) inner chamber and stainless steel housing, solid outer door and internal glass door. The PREMIUM models have an intuitive menu and user friendly software and a USB port with flash drive for data download to USB stick and for uploading programs. They can be connected to an Ethernet or Wi-Fi network for remote control from any computer, and users can receive notifications about selectable parameters via e-mail.

Supplier: Binder

The powerful KB Series of cooling incubators for microorganisms are able to incubate with exceptional precision even when fully loaded. Units have a stainless-steel inner chamber, feature proven APT.line™ preheating chamber technology, have a temperature range of 0 to +70 °C, hot-air disinfection routine, and can be programmed for weekend operation with ease. This KB unit consumes as much as 40% less energy than the previous model.

Supplier: Binder

Thanks to thermoelectric cooling technology with heat dissipation, KB ECO cooled incubators are one of the most energy efficient cooling incubators on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation.

Supplier: Binder

These energy efficient cooled incubators have been designed for use in the temperature range from +4 to 100 °C. They feature a Peltier cooling system for finely controlled cooling down to 4 °C together with powerful conventional heating. The unit has easy to clean stainless steel interior and inner safety glass door. The incubators are ideal for use in microbiology, genetics, zoology, food and beverage industries, medicine, forensics, pharmaceutical and cosmetic industries. USB port for reading data and Ethernet interface for communication software APT-COM™ DataControlSystem.

Supplier: Binder

The KB PRO series are powerful cooling incubators with energy-efficient cooling with modern inverter cooling unit. The units with proven APT.line™ preheating chamber technology have a temperature range of -20 to +100 °C and comprehensive programming options. The models have a stainless-steel inner chamber and cover a wide range of applications that extend well beyond incubation. Optional light modules are also available to turn the KB PRO into a chamber for ICH photostability testing or plant growth.

Supplier: MEMMERT

Sets eco standards for cultivation below room temperature: Unmatched energy efficiency, excellent heat-up, cool-down and recovery times.

Supplier: MEMMERT

Udvalget af afkølede inkubatorer har et temperaturområde fra under nul op til 60 °C, enheder sikrer hurtige og præcise opvarmnings- og nedkølingstider uden energikrævende strømudbrud. Alle modeller har indvendigt kammer og hus af rustfrit stål, hvilket sikrer lang levetid og nem rengøring. Disse kompressorkølede inkubatorer har en integreret datalogger og digital timer, som kan justeres fra et minut til 99 dage og 23 timer.

Supplier: VELP SCIENTIFIC

These cooled incubators have a refrigerated thermostat with 120 and 200 L capacity that ensures excellent connectivity, high performance in temperature control thanks to the innovative auto tuning.

Supplier: Thermo Fisher Scientific

Heratherm refrigerated incubators feature Peltier technology which maintains sample integrity at temperatures from 5 to 70 °C, very low energy consumption and they never need defrosting. Peltier technology ensures temperature uniformity and stability with minimal disruption due to vibrations. The compact units have a stainless steel interior, large clear vacuum fluorescent display and an internal glass door for viewing samples safely.

Supplier: Thermo Fisher Scientific

Heratherm™ cooled incubators offer exceptional environmental control in a hassle-free chamber that is easy to program and use.

Supplier: Hettich

The HettCube range of cooled incubators provide functionality and customised features. The inner chamber is made from acid-proof stainless steel (DIN 1.4301). Units only heat and cool as necessary, ensuring lower power consumption, operating costs and environmental impact. At an operating temperature of 37 °C the units consume less than 0,05 kWh. The fan is located outside the usable space, so there is a low air flow inside the chamber and a low noise level.