Supplier: VARIAN

PL-Guanidine MP SPE, flangeless, 500 mg/6 ml

Supplier: VARIAN

PLgel Olexis is optimized for the analysis of high molecular weight polymers at elevated temperatures, particularly polyolefins and high performance polymers.

Supplier: VARIAN

Native silica is generally regarded as the most polar SPE sorbent available. Bond Elut™ SI is particularly effective at separating compounds with a very similar structure. Applying the analytes in a non-polar solvent, then increasing the solvent polarity by increasing the concentration of a polar modifier, such as THF or ethyl acetate, delivers effective separations.

Supplier: VARIAN

Bond Elut™ C8 is very similar in properties to C18, but is not as retentive for non-polar compounds, due to its shorter hydrocarbon chain, and therefore reduced carbon loading. C8 is an excellent replacement for C18 when analytes are too strongly retained for effective elution. The potential for polar interactions is somewhat higher than for C18 because there is less coverage of the silica surface. These polar interactions are not, however, a significant property of C8.

Supplier: VARIAN

High efficiency 0,15 and 0,18 mm Int.Ø columns are a simple and cost effective way to increase sample throughput with existing GC or GC/MS instruments.

Supplier: VARIAN

EZ-Guard columns combine a FactorFour column with a built-in guard column.

Supplier: VARIAN

Ideal as a confirmation column for reliable results.

Supplier: VARIAN

Bond Elut™ NH₂ is a weaker anion exchanger than sorbents such as SAX (a quaternary amine sorbent that is always charged) and is therefore a better choice for retention of very strong anions, such as sulfonic acids, which may retain irreversibly on a SAX sorbent. Similar to Diol and SI sorbents, Bond Elut™ NH₂ is excellent for the separation of structural isomers.

Supplier: VARIAN

CP-Squalane gives the best separation of C₄-C₁₀ hydrocarbons.

Supplier: VARIAN

Bond Elut™ SAX is a strong anion exchange sorbent ideally suited for the extraction of compounds such as carboxylic acids, which may not retain effectively on weak anion exchange sorbents. The sorbent is supplied in the chloride counter ion form. You can modify the selectivity of the phase by replacing the chloride ion with other anions, such as acetate and hydroxide.

Supplier: VARIAN

CP-Carbowax 400 has highest resolution for amyl alcohols for accurate quality inspection.

Supplier: VARIAN

CP-Sil PONA CB delivers accurate analysis of paraffins, olefins, naphthalenes and aromatics in complex hydrocarbon mixtures.

Supplier: VARIAN

Microsorb™ Silica is ideal for the separation of low molecular weight compounds that dissolve in organic solvents. Separations on silica columns depend upon the difference in orientation, type and number of functional groups associated with the compounds in the sample.

Supplier: VARIAN

Columns for free fatty acids in dairy products.

Supplier: VARIAN

CP-Wax for volatile amines and diamines is optimised for analysis of volatile amines and diamines, particularly C3-C8 amines and diamines. The column delivers symmetrical peaks due to basic reagent deactivation and exhibits good inertness towards basic compounds.

Supplier: VARIAN

The Select FAME column is tuned for optimal cis-trans separations of FAMEs, especially C₁₈ isomers.

Supplier: VARIAN

Gas sampling bags in Tedlar.

Supplier: VARIAN

VersaPlate well plate tubes, NEXUS, 300 mg

Supplier: VARIAN

Solid Phase Extraction (SPE) plate, SPEC 96-well plate, Silica-based sorbents, 15 mg

Supplier: VARIAN

The MetaCarb™ line of carbohydrate columns provides high resolution columns for applications requiring high performance carbohydrate and organic acid analysis. These columns contain sulfonated polystyrene resins in the Calcium (87C), Hydrogen (87H), and Lead (87P) forms, and provide a wide range of selectivities for carbohydrate and organic analysis. They are widely used in the food and beverage industries for analysis of sweeteners, corn and cane sugars, fruit juices, soft drinks, beer and dairy products.

Supplier: VARIAN

The PolarGel range is ideal for use with polar solvents, such as dimethyl formamide (DMF) and dimethyl sulfoxide (DMSO), and for solvent combinations such as tetrahydrofuran with water.

Supplier: VARIAN

The ProSEC 300S column is specifically designed as a single column solution for globular protein analysis. The pore size selection and optimisation provides an extended linear resolving range so that this single column can be used for analysis across the full range of globular proteins.

Supplier: VARIAN

These rigid, strong ion exchange materials are extremely hydrophilic that is ideal for purification of biomolecules. The PL-SAX and PL-SCX materials are totally polymeric and are chemically and thermally stable over a full range of HPLC conditions.

Supplier: VARIAN

These columns are ideal for the anion exchange HPLC separations of proteins and deprotected synthetic oligonucleotides under denaturing conditions.

Supplier: VARIAN

Packed GC columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry

Supplier: VARIAN

Chloromethylpolystyrene known as merrifield resin, PL-CMS is a copolymer support for solid phase synthesis of peptides using Boc chemistry.

Supplier: VARIAN

The EasiCal system for organic solvents consists of two different combs, each with ten detachable spatulas supporting a mixture of five polymer standards with MWs selected to provide equidistant calibration points for greater accuracy.

Supplier: VARIAN

MonoChrom® columns provide excellent chromatography of organic amines, organic acids, amphoteric compounds and neutral compounds.

Supplier: VARIAN

CP-Sil 88 columns have high selectivity towards positional and geometric isomers for ease-of-use.

Supplier: VARIAN

Bond Elut™ C18 OH is a non-end capped version of the octadecyl bonded phases that enables the silanols on the silica surface to be more active. This low-load C18 has well-controlled silanol activity that permits the fractionation of metabolites and enhances retention of basic compounds compared to an endcapped C18. The pore size makes it a good choice for peptide extraction.