Supplier: MACHEREY-NAGEL

The test paper allows the sensitive and specific detection of Fe(II) ions. Even small amounts of Fe(II) can safely be detected in presence of large amounts of Fe(III).

Supplier: MACHEREY-NAGEL

AQUADUR® sensitive test strips for semi-quantitative analysis of low water hardness, after amongst other things the softening of water.

Supplier: Hach

Tests for all water analysis applications. The cuvette is a closed sytem which is safe for the user and the environment. Suitable for the laboratory robot.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of nickel in water samples.

Supplier: Lovibond

CHECKIT® Comparator is a compact and handy colorimetric unit which is suitable for both mobile and static analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to use colorimetric analysis system.

Supplier: MACHEREY-NAGEL

With these test strips two paper zones are sealed onto the lower end of a plastic strip, one for the determination of the silver concentration and one for pH measurement. After dipping the test strip in the test solution the colours of the test zones are compared with the colour scale on the tube.

Supplier: 3M Food Safety

The 3M™ Flip-Top Dilution Bottle with 90 ml Peptone Water is a leak-resistant plastic cylinder with a flip-open lid that seals securely for safe shipping and handling.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of copper concentrations as low as 0.1 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad increasing the sensitivity significantly. Ideal for rapid and easy analysis of copper directly on-site. No maintenance or calibration is required.

Supplier: Hach

Test kit, Amino acid reagent for phosphate determination

Supplier: Hach

Test kit, Iron (FerroVer®), Range: 0 - 10  mg/l

Supplier: Hach

Test kit, Copper, Range: 0,04 - 5,00 mg/l

Supplier: Hach

5-in-1 test strips are multi-parameter test strips test offering five water quality measurements on 1 strip.

Supplier: Lovibond

Test kit, Ortho phosphate VM tube test, Range: 3 – 60 mg/l, For unit: Spectrodirect

Supplier: Hach

Used for sulphide determination by the methylene blue method.

Supplier: Hach

Simple, economical rapid colour disc method with an easy to carry test kit.

Supplier: Hach

The most accurate visual test kit method for simple and economical measurement of pH with fast and accurate comparisons.

Supplier: Hach

Test kit, EDTA solution, 1 M, 50 ml, for determination of calcium and magnesium hardness in water by the calmagite colorimetric method

Supplier: Hach

Qualitative results using traditional colour comparator disc methods.

Supplier: Hach

Ready for use, photometric evaluation system and environmentally friendly.

Supplier: Hach

This kit provides measurement of ortho- (reactive) and meta- (condensed) phosphate (requires hot acid digestion).

Supplier: Hach

Cuvette tests for water testing applications.

Supplier: Hach

For Iodine values >0,2.

Supplier: Hach

One unit each of the reagents is sufficient for 30 days of operation. The standard solution is sufficient for ten calibrations.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of zinc in water samples.

Supplier: Lovibond

Highly sensitive and precise COD testing of water with minimum effort.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of chlorine in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of peroxide in water samples.

Supplier: Lovibond

Test kit, Copper No1/No2 tablet set (100 of each), Range: 0,3 – 5 mg/l Cu , For unit: MD100, MD200, MD600, MD610,