You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Capillary nuts
Supplier: Restek
These capillary nuts are ideal for Shimadzu 17A, 2010, and 2014 GCs.
Expand 2 Items
Fittings, RheFlex®, Rheodyne®, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These fittings are made from stainless steel.
Expand 2 Items
Ferrules for Thermo Scientific GCs
Supplier: Restek
Graphite Ferrules for Vu2 union connectors.
Expand 5 Items
MXT®-union connector kits for fused silica columns
Supplier: Restek
These MXT® union connectors kits are suitable for connecting metal and/or fused silica GC columns.
Expand 6 Items
One-piece fingertight fittings, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
PEEK or PCTFE.
Expand 6 Items
GC ferrules for Shimadzu
Supplier: Restek
Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.
Expand 3 Items
Injector/detector plug nuts
Supplier: Restek
These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.
Expand 1 Items
Low pressure unions, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These low pressure unions are made from PEEK, ETFE, Delrin or PP.
Expand 13 Items
Fittings and sleeves for ¹/₁₆" Ø tubing, NanoTight™, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE
Expand 4 Items
MSD conversion fitting
Supplier: Restek
This conversion fitting is a flat, soft aluminum sealing ring deforms and butt-seals against the MSD interface. A standard Vespel® ferrule seals the column and 1,59 mm stainless steel nut.
Expand 1 Items
GC column-mass spectrometer connector, EZ No-Vent®
Supplier: Restek
A critical orifice in the EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas required. This enables to skip the lengthy vent and pump-down cycle.
Expand 6 Items
Plugs and caps, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific®, P-116, plug for micro fittings, PEEK, Black
Expand 28 Items
Metric threaded adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These female M6 adapters are made from PEEK, EFTE or PCTFE.
Expand 6 Items
Fittings, LuerTight™, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.
Expand 7 Items
Fittings for 10-32 Ports and ¹/₆" stainless steel tubing, EXP®
Supplier: OPTIMIZE TECHNOLOGIES
The EXP® Fitting System is the premier adjustable nut and ferrule compression fitting for extreme high-pressure connections between ¹/₁₆" tubing and any 10 to 32 port.
Expand 1 Items
Very high pressure PK fittings, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.
Expand 6 Items
Connectors and ferrules, Gerstel GRAPHPACK® 3D/2
Supplier: Restek
GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule - the ideal seal for GC applications.
Expand 5 Items
High pressure fittings, for 360 µm tubing, Nanovolume™
Supplier: VICI JOUR RESEARCH
These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).
Expand 35 Items
Ferrules, Alumaseal®
Supplier: Restek
These ferrules are made of aluminium eliminate out-gassing and make leak-tight seals for less detector noise. Its unique two-piece design permanently locks on fused silica tubing without causing breakage.
Expand 3 Items
Fittings, CGA
Supplier: Restek
CGA-specified nuts and nipples with internal frit, 6,35mm NPT nickel-plated brass.
Expand 3 Items
Capillary column nuts for Bruker/Varian GCs
Supplier: Restek
These capillary nuts are made from brass or stainless steel.
Expand 2 Items
One-piece hex-head fittings
Supplier: VICI JOUR RESEARCH
One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.
Expand 2 Items
Fingertight adapters, Color-Sleeve
Supplier: VICI JOUR RESEARCH
These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.
Expand 26 Items
External national pipe thread adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.
Expand 7 Items
Fittings, Super Flangeless™, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These fittings eliminate loosening due to tubing twist.
Expand 17 Items
Adapter ferrules, Valco®
Supplier: Restek
Fused silica adapter ferrules are made from valcon polyimide, a unique graphite reinforced composite that is specially made to maximise mechanical stability at temperatures up to 350 °C.
Expand 7 Items
Fittings, MicroTight®, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific® MicroTight®, F-124H, fitting, micro headless knurl, PEEK blue, 6-32 coned port, for 360 μm OD tubing, 5000 psi, PEEK
Expand 11 Items
EXP®2 TI-LOK™ All-in-One PEEK Ferrule, ¹/₁₆"
Supplier: SHIMADZU
High-Performance fittings for liquid chromatography simple, hand-tightened connections for all LC applications achieve zero dead volume with Titanium and PEEK technology high-pressure, reusable connections for HPLC and UHPLC.
Expand 1 Items
Barbed adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.