You searched for: Fittings and Connectors

Supplier: SHIMADZU

High-Performance fittings for liquid chromatography simple, hand-tightened connections for all LC applications achieve zero dead volume with Titanium and PEEK technology high-pressure, reusable connections for HPLC and UHPLC.

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: Restek

Internal uniona are made of 300 series stainless steel with end of tubing that seats squarely at bottoms of fitting details. Suitable for 1,6 mm OD tubing.

Supplier: ELDON JAMES

These tees are made of Natural Kynar® material, which has a temperature range of −62 to +107 °C and a pressure of 260 psi at 21 °C

Supplier: Restek

Internal tees are made of stainless steel are used to connect three lines. Suitable for 1,6 mm OD tubing.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: Restek

Click-on connectors allow you to change traps quickly, without introducing oxygen into your system.

Supplier: CADENCE SCIENCE

These tubing connectors are used in hospitals, laboratories, and biomedical instruments. The metal connectors are precision machined and are made from either nickel plated brass or 316 stainless steel.

Supplier: VICI JOUR RESEARCH

Unions for easy connection of low pressure solvent lines.

Supplier: Restek

These ferrules can be used with Vacuum Vu-Union® connectors.

Supplier: Restek

PTFE ferrule with fitting size 1,6 mm, PTFE, Hole Ø: 1,6 mm

Supplier: NEOLAB

Tube Luer-connector with olive and Luer-Lock cone.

Supplier: UPCHURCH SCIENTIFIC

Specifically designed for Ismatec® pump tubings.

Supplier: Restek

Replacement nut, 0,8 mm

Supplier: SEMADENI

PP, gray.

Supplier: Restek

Valco®, Zero dead volume tee, Siltek®/Sulfinert® treated, 1/8”, Siltek® treated stainless steel

Supplier: VICI JOUR RESEARCH

Standard fitting kit

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, XU-655, flangeless fittings includes nut, PEEK black and washer, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 1/4" OD tubing

Supplier: Restek

These nuts are designed for Agilent 5890/6850/6890/7890 GCs. Nuts for use with standard ¹/₁₆" type ferrules are designed to fit a wider variety of ¹/₁₆" ferrules.

Supplier: VICI JOUR RESEARCH

These fittings are designed for capillary LC, used in HTS techniques, proteomics, genomics, and other newer developments in industrial research requiring small sample size for reduction of analysis time, fittings and unions are easy to handle.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: VICI JOUR RESEARCH

Low pressure adapter, PP, plug 1/4” -28 male, PP