You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
T-pieces
Supplier: EDWARDS HIGH VACUUM METTLER
T-pieces made of aluminium or stainless steel.
Expand 7 Items
Elbows, stainless steel
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 40 mm, Stainless steel
Expand 3 Items
GC ferrules, without holes
Supplier: VARIAN
Vespel®, Ferrules, vespel, blank, without holes, O.Ø 1/16"
Expand 1 Items
Ultimate union kits and fittings
Supplier: Agilent
Ultimate union provides low dead volume column connections that are used to create an inert, leak-free, and robust seal.
Expand 13 Items
Hose connections
Supplier: witeg Labortechnik
Hose connections, bent or straight, made of polypropylene (PP) or PFA, with silicone rubber liners.
Expand 8 Items
Tubing connectors, SVS, bent
Supplier: witeg Labortechnik
Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.
Expand 1 Items
Accessories for LPLC columns
Supplier: Merck
Fittings and adapters for LPLC columns.
Expand 9 Items
Sigma-Aldrich® One-piece fingertight fittings
Supplier: Merck
Standard knurled PEEK fittings with 10-32 thread, no ferrule to drop onto the floor.
Expand 1 Items
Blanking flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Blanking flanges made of aluminium or stainless steel.
Expand 5 Items
Cross pieces
Supplier: EDWARDS HIGH VACUUM METTLER
Cross pieces made of aluminium or stainless steel.
Expand 6 Items
Fittings for Shimadzu LC systems
Supplier: Agilent
These fittings for Shimadzu HPLC systems provide leak-free connections and prevent the loss of peak shape and resolution.
Expand 7 Items
Metal adapters for flexible metalic tubing
Supplier: HWS LABORTECHNIK
Metal adapter with PT 100, for flexible metallic tubing.
Expand 1 Items
Plugs, Swagelok®, Sigma-Aldrich®
Supplier: Merck
Plug, 400-P, 6,35 mm, Brass
Expand 5 Items
Reducing pieces for NW flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing pieces made of stainless steel.
Expand 4 Items
Ferrules for gas chromatography
Supplier: Restek
Ferrules are available in Vespel®, graphite or Vespel®/graphite.
Expand 71 Items
Tubing connectors, X-shaped, PP
Supplier: SEMADENI
Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.
Expand 1 Items
Ferrules for single ferrule column connectors
Supplier: VARIAN
Ferrule, 0,32 mm to 0,25 mm ID, 15% graphite/85% Vespel®
Expand 5 Items
Elbows, aluminum
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 16 mm, Aluminium
Expand 3 Items
Reducing pieces for NW flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing pieces made of aluminium.
Expand 3 Items
Fittings, InfinityLab
Supplier: Agilent
InfinityLab Quick Connect fittings are 'finger-tight' reusable fittings for UHPLC, stable to 1300 bar.
Expand 14 Items
Sigma-Aldrich® Swagelok® ferrule set
Supplier: Merck
Swagelok®, Swagelok® Nut, Front and Back Ferrule Set,400-S, brass, 1/4 in, Brass
Expand 3 Items
One-piece fingertight fittings
Supplier: VARIAN
PEEK fittings resists pressure up to 5000 psi and temperature of 100 °C.
Expand 3 Items
Hose nozzles, aluminium
Supplier: EDWARDS HIGH VACUUM METTLER
Hose nozzle NW25 (DN25), Aluminium
Expand 1 Items
Bond Elut adapters
Supplier: VARIAN
Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge.
Expand 1 Items
Adaptors for PerkinElmer
Supplier: Agilent
Agilent adapters are equivalent to the PerkinElmer FIMS/FIAS versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.
Expand 11 Items
Tubing connectors, T-shaped
Supplier: PIEPER FILTER
Mini connectors for tubing, made of PP, translucent, T-shape.
Expand 5 Items
Capillary column ferrules for gas chromatography
Supplier: Agilent
Graphpack 2M connector for column ID 0,2 mm
Expand 63 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Integra
Supplier: Industrial Physics
Supplier: AAT BIOQUEST
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One