You searched for: Cleanroom Wipes

Supplier: Texwipe

These 100% polyester wipes are made by a hydroentanglement process using jets of water to mechanically entangle the fibres, eliminating the need for chemical binders.

Supplier: Texwipe

Alpha® 1 Microfibre cleanroom wipes are made from a 80% polyester/20% nylon material with a sealed edge, and are cleanroom manufactured.

Supplier: Texwipe

Cut-edge polyester single ply wipe that is ideal for floor cleaning and for applying cleaning solutions and disinfectants on floors.

Supplier: Texwipe

TechniCloth II wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe. TechniCloth II features proprietary ULP (ultra low particulate) treatment, giving it significantly lower particle generation than TechniCloth.

Supplier: Texwipe

This non woven 55% cellulose/45% polyester blend wipe is an excellent general-purpose sterile wipe in areas where economy and cleanliness are of critical importance.

Supplier: Texwipe

Vertex® wipes are the cleanest, most consistent, and most rigorously quality tested cleanroom wipes.

Supplier: Texwipe

These pre-wetted wipes are made of a fabric blend of 55% non woven hydroentangled cellulose and 45% polyester.

Supplier: Texwipe

Absorbent, single ply, 100% continuous filament polyester wipes, feature enhanced sorbency.

Supplier: Texwipe

TechniScrub™ dry wipes are made from a 50% polyester/50% cellulose non woven material with a cut edge. They are cleanroom manufactured.

Supplier: Texwipe

This soft 100% melt-blown PP wipe is pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionised water solution.

Supplier: Texwipe

Revolve™ wipes, sustainable wipes made for the cleanroom industry, are made from 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

ThermaSat™ 60 wipes are made from 100% polyester with a sealed edge, and cleanroom laundered.

Supplier: Texwipe

ThermaSeal™ wipes are hot cut polyester wipes for all-purpose cleaning in critical environments. Ideal for cleaning medical devices, displays and products in the semiconductor and microelectronics area.

Supplier: Texwipe

SterileWipe™ AS 10 is a 2 ply, double knit construction, 100% continuous filament polyester wipe that offers high sorbency in a sealed-border wipe to prevent particle and fibre release.

Supplier: Brand

Fleece wipes for impregnation with universal or disinfecting detergents.

Supplier: Texwipe

These FoamWipe™ wipes are made from open-cell, 100 pore-per-inch polyurethane foam.

Supplier: Texwipe

TechniCloth® wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

These lightweight, high quality wipes are constructed from 100% continuous-filament polyester.

Supplier: Texwipe

These wipes are primarily intended for the usage as flat mop covers for cleaning and decontaminating floors. Made of non-woven polyester, they are especially suitable for cleaning and removing residues.

Supplier: Texwipe

MiracleWipe® is made from 100% continuous-filament nylon. The double-knit construction, texture and body of the nylon filament give the wipes excellent softness and superior strength.

Supplier: Texwipe

These hot-cut polyester wipes are suitable for all-purpose cleaning in critical cleanroom environments.

Supplier: Texwipe

These 100% melt-blown PP wipes are pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionized water solution.

Supplier: Texwipe

These highly sorbent wipes are made from 100% continuous filament polyester in a double-knit, 'no run' interlock pattern. The wipes are pre-wetted with 70% IPA and 30% deionised water.

Supplier: Texwipe

This wipe made of 55% non woven cellulose and 45% polyester fibre is pre-saturated with 6% IPA.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

Texwipe® is a strong, double-sided twill-pattern cotton wipe woven in a cross section of 118×60 threads per square inch. The product is manufactured with long stable cotton yarn to eliminate free-floating fibres on fabric surfaces. Ideal for cleaning diffusion furnace equipment in water fabrication and other equipment in areas where high temperatures prevent the use of synthetic wipes.

Supplier: Texwipe

These premium heavy-weight all-purpose wipes are made from 100% continuous filament polyester in a double-knit, no run, interlocked pattern. Soft and non abrasive, they are ideal for critical environments where contamination control is essential.

Supplier: Texwipe

These wipes are constructed from a 100% melt-blown PP substrate that is pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter).