Flüssigkeits-Prozessfilter
Prozessfilter für Flüssigkeiten werden verwendet, um Partikel und Flüssigkeiten in einer Suspension zu trennen. Bei der Auswahl eines Filters ist es wichtig, den richtigen Filtertyp zu wählen, damit die Anforderungen des Systems erfüllt werden. Filter gibt es in drei Grundvarianten: Kartuschenfilter, Clean-in-Place-Filter (CIP) und Beutelfilter. Große Filterflächen in einigen Modellen verhindern Kavitation an der Pumpe, während Ausführungen aus Edelstahl oder Polymer chemische Beständigkeit bieten.
Avantor® Hichrom, Inlet Solvent Filters
Supplier: Avantor
These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.
Expand 2 Items
Avantor® Hichrom Bottom-of-the-Bottle™, Inlet Solvent Filters
Supplier: Avantor
These filters are made from 100% PEEK.
Expand 2 Items
VWR® Hichrom Last Drop™ Einlassfilter
Supplier: Avantor
Der Last Drop™-Eluentenfilter verwendet ein flaches Element, das parallel zum Boden des Reservoirs sitzt, sodass der Filter das gesamte Eluent bis auf die letzten 2% ansaugen kann, ohne Luft in das System zu ziehen. Der Filter besteht aus einem Filterelement aus Edelstahl 316 oder PTFE in einem inerten Gehäuse.
Expand 3 Items
Solvent Filter/HPLC
Supplier: ROBU GLASFILTER
ROBU® VitraPOR® solvent filter for HPLC provides precise and reliable filtration of solvents, ensuring optimal performance in high-performance liquid chromatography systems.
Expand 1 Items
Ansaugfilter, BOLA
Supplier: Bohlender
Diese PTFE-Saugfilter bestehen aus einem Aufnahmebehälter mit Innengewinde und einer leicht austauschbaren Fritte. Sie eignen sich ideal als Vorfilter vor Pumpensystemen, um Dichtungen, Kolben oder Säulenpackungen vor vorzeitigem Verschleiß durch Verunreinigungen zu schützen.
Expand 4 Items
Ansaug-/Begasungsfilter, VitraPOR®
Supplier: ROBU GLASFILTER
ROBU® degassing filter with integrated VitraPOR® filter ensures efficient solvent degassing with inert gases, combined with reliable filtration. Ideal for chromatography and analytical applications, it offers high chemical and thermal resistance.
Expand 5 Items
Ansaugfilter mit PTFE-Membran, b.safe
Supplier: Bohlender
Ansaugfilter mit PTFE-Membran
Expand 1 Items
Inlet filter, Rheodyne®
Supplier: IDEX RHEODYNE
Inlet filters are used to extract particles from the sample between the injector and the column.
Expand 2 Items
Filter for ultrapure water system, arium® CellPlus
Supplier: Sartorius
The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.
Expand 1 Items
Mobile Phase Filters
Supplier: MICROSOLV
Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.
Expand 1 Items
Solvent spargers
Supplier: PerkinElmer
Solvent reservoir sparger, Titan, Porengröße: 10 µm
Expand 2 Items
Solvent inlet filters
Supplier: Merck
Inlet filter, stainless steel, Porengröße: 2 μm
Expand 2 Items
Solvent filter/degasser
Supplier: Agilent
It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.
Expand 7 Items
Mobile phase inlet filter, Hastelloy® C
Supplier: VARIAN
This mobile phase inlet filter operates up to 500 °C and is compatible with halogenated solvents.
Expand 1 Items
Low pressure slip-on inlet filter
Supplier: Restek
This slip-on inlet filter is made of 316 stainless steel tip with a tefzel collar seals to a corrosion-resistant 316 stainless steel filter element.



