Pure and Ultra Pure Water Systems

Supplier: Merck

Milli-Q® CLX 7000 analyser feed systems produce up to 3000 L/day of pure water from tap.

Supplier: Merck

Economical water system, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 l/min. For clinical analysers with pure water needs up to 480 L daily

Supplier: Merck

This Reverse Osmosis membrane removes 95 to 99% of contaminants including ions, particulates, bacteria, and organic molecules (MW >200kDa)

Supplier: Merck

Economical water system with Elix® technology, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 L/min. For clinical analysers with pure water needs up to 300 L daily.

Supplier: Merck

An integrated ultrapure and pure water system that is intelligent, easy to use and environmentally friendly.

Supplier: Merck

The Milli-Q® SQ 200 water purification system delivers ultrapure (Type 1) water from an SQ Switch 3,5 L tank filled with pure reverse osmosis (RO) water.

Supplier: Merck

Reliable water purification for results reproducibility and lab productivity.

Supplier: Merck

Milli-Q® EQ 7008/7016 ultrapure and reverse osmosis (RO, Type 3) water systems are designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ.cm at 25 °C; total organic carbon (TOC) ≤5 ppb] direct from a tap water source. Final ultrapure water quality can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab.

Supplier: Merck

The Milli-Q® SQ 240CV water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a fixed preset volume dispenser that records and repeats the dispensing volume of ultrapure water.

Supplier: Merck

The Milli-Q® SQ 200P water purification system delivers ultrapure (Type 1) water from a lab's pressurized purified (RO/DI) water loop. It benefits from a flexible handset dispenser to deliver ultrapure water.

Supplier: Merck

The compact, easy to use Milli-DI® water purification system has been designed especially to meet a need for small quantities of pure water, between 3 and 5 litres per day. The water produced is suitable for use in chemical and electrochemical applications, for the production of buffers, reagents and microbiological culture media, and a multitude of other applications. Milli-DI® water can also be used as feed water for ultrapure water systems.

Supplier: Merck

The Milli-Q® SR 240XL water purification system delivers pure reverse osmosis (RO) water to one mobile SQ Switch 3,5 L tank and one SQ 50 L tank. The 3,5 L tank is easily transferred to the Milli-Q® SQ 200 Purification system to produce fresh ultrapure water anywhere in the lab.

Supplier: Merck

The Milli-Q® HR 7060 system is a high-throughput standard water purification solution that can reliably meet the diverse needs requiring reverse osmosis (RO, Type 3) pure water - for a single laboratory or an entire research facility.

Supplier: Merck

RiOs™ Essential systems are ideal for laboratories needing reliable, constant production of Reverse Osmosis, RO (Type 3) water from potable tap water. They integrate complementary water purification techniques, including pretreatment and high-performance reverse osmosis (RO) membranes.

Supplier: Merck

Elix® Essential delivers Type 2 water customised to fit a broad range of research areas. It is designed to be fed from potable water and is the ideal feed for any laboratory equipment, including ultrapure water systems such as Milli-Q® systems.

Supplier: Merck

Milli-Q® IQ Element water purification and dispensing unit is designed to fit into your trace analysis workflow. The Milli-Q® IQ Element unit, combined with a Milli-Q® IQ 7 series water purification system, delivers analytical grade ultrapure water that is suitable for trace and ultra-trace elemental analyses, including ICP-MS, GF-AAS and trace IC.