Supplier: Heidolph Instruments GmbH & Co.KG

Anchor-type impellers for mixing tasks with high viscosity.

Supplier: Cytiva

Stirring Tools, Mixer M-925 mixing chamber, 2 ml

Supplier: DWK Life Sciences

This unit includes a top cap with liners, glass rod, magnet holder, magnet and stirring paddle (for sizes 125 ml or larger).

Supplier: DWK Life Sciences

A non-breakable stainless steel shaft to replace the glass shaft which is included with Celstir® flasks. May be retrofitted to existing Celstir® flasks.

Supplier: Corning

The stir bar retriever contains a strong magnet to remove a stir bar from all glass and plastic containers used in the laboratory.

Supplier: DWK Life Sciences

This unit includes a top cap with liners, glass stirring ball and connecting silicone tubing. This glass impeller assembly is designed for replacement on all Magna Flex™ style flasks.

Supplier: Heidolph Instruments GmbH & Co.KG

VISCO JET® homogenises low and high viscosity liquids in vessels by creating dynamic flow conditions by means of the so-called cone principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.

Supplier: witeg Labortechnik

These overhead stirrers are designed for chemical, biological, medical or pharmaceutical applications. The device is especially suited for use with low viscosity liquids which become highly viscous during the stirring process.

Supplier: GLASWARENFABRIK KARL HECHT

Mini magnetic stirrer without heating platform.

Supplier: GLASWARENFABRIK KARL HECHT

This magnetic stirrer with heating plate is made of anodised aluminium.

Supplier: witeg Labortechnik

Stirrer guides are of different types.

Supplier: witeg Labortechnik

General purpose basic laboratory overhead stirrer, ideal for stirring low to medium viscosity materials. The analogue unit has a chrome-plated stainless steel chuck to prevent corrosion. Ideal for use in schools, universities and inspection laboratories.

Supplier: HWS LABORTECHNIK

The HWS stirrer guide with ceramic mechanical seal and encapsuled ball bearing in stainless steel to ensure safe working under difficult application. HWS ceramic mechanical seal is applicable for various stirrer materials like glass, stainlesssteel, hastelloy, and more its particular advantage is in combination with coated stirrers (PFA,PTFE, and more) because the static seal prevents damage to the shaft during operation.

Supplier: GLASWARENFABRIK KARL HECHT

Square CERAN® heating plate fully electronic control of the speed and the heating plate temperature, with digital display and timer function.

Supplier: witeg Labortechnik

Stainless steel. This is a digital multi-position magnetic stirrer without heating, controlled by microprocessor. Modules consist of 4 or 8 stirring positions on a stainless steel platform, with a single electrical connection. Ideally suited for use in incubators and climatic chambers.

Supplier: witeg Labortechnik

This flexible coupling fix between motor and stirrer shaft.

Supplier: witeg Labortechnik

Stirring impeller for high speed-type and high torque-type overhead stirrer.

Supplier: witeg Labortechnik

Digital multi-position magnetic stirrer ideal for mixing and heating simultaneously. Ideal for heat sensitive procedures in microbiology, biochemistry or sample drying. Units feater a powder-coated steel body which is easy to clean. Each plate can accommodate a support rod.

Supplier: HWS LABORTECHNIK

Stainless steel stirrer couplings with torsion springs.

Supplier: witeg Labortechnik

These high-speed overhead stirrer tools are designed for mixing applications in the laboratory specialised for low- to medium-viscosity materials.

Supplier: witeg Labortechnik

DURAN®, borosilicate glass interchangeable stirrer shafts and bearings.

Supplier: witeg Labortechnik

Stirring blades made of PTFE.

Supplier: Hach

Ideal for stirring in extremely small containers.

Supplier: GREINER GASSNER

Borosilicate glass with PTFE stirrer shaft insert and PTB screw cap ideal fit based on the screw fixing and insert position. The medium or gas to be stirred comes into contact with glass or PTFE. As vacuum-tight stirring cannot be achieved due to the cold flow of PTFE (Hostaflon), a sealing element made of Viton is located in the top part of the replaceable stirrer shaft. This sealing element creates a vacuum-tight connection between the stirrer shaft and agitator shafts. This design ensures excellent results from mixing trials in a vacuum, as well as for long-term trials at high speeds.

Supplier: GLASWARENFABRIK KARL HECHT

Magnetic stirring bar retriever, Stirring Tools, Length: 350 mm

Supplier: SciLabware

Stirrer blades made of PTFE, and they can be pivoted on the glass stirrer shaft to allow passage through small apertures.

Supplier: ASYNT

For overhead stirring of three reactions using only one overhead stirrer.

Supplier: SciLabware

Stirring Tools, SVL®, Stirrer bearing with Quickfit® ground glass con

Supplier: MOHR

This magnetic stirrer with controller for standard heating mantles from 500 to 4000 ml, for stirring the medium in a round glass flask.

Supplier: SciLabware

A range of PTFE coated stirrer heads designed to screw into the threads on SVL® glass stirrer shafts.