Samplers

Supplier: BURKLE

Dipping bottle with glass container for sampling in sewage plants, for mud and water samples. For testing crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants of Hazard Categories IIA and IIB. Completely made from non spark-producing materials. Dipping frame made of nickel plated brass, Easy-Click closure made of electrically conductive polyamide.

Supplier: BURKLE

This MultiDispo zone samplers for taking samples from multiple layers of the sample material.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: Bertin Instruments

Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: BURKLE

Glass bottle and hose are connected in such a way that they conduct electricity and are grounded via a grounding cable. Operation: Ground the device, immerse the suction hose to the required depth, attach the adapter to the sampling bottle, generate a vacuum with the manual pump and collect the sample, remove the filled sampling bottle, close it and label it.

Supplier: BURKLE

For sampling bulk goods at depths of up to 3,5 metres, depending on the density of the bulk goods to be sampled. Inserting the sampler into the bulk goods closes the collection chamber. At the desired depth, the collection chamber is opened by withdrawing the sampler, the chamber is filled and can be pulled out and collected.

Supplier: BURKLE

The scratcher is designed for powders and granules that do not flow freely.

Supplier: VWR Collection

All sample dippers are made of blue PP and consist of a bottle with snap handle.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: Merck

Ease of use. Uncompromising safety. Data integrity and flexibility. This is what the new MAS-100 Atmos® sampler stands for, revolutionising microbiological monitoring of compressed gases.

Supplier: Merck

The perforated lid is designed for active air monitoring with MAS-100® Sirius instruments at a flow rate of 100 standard Litres per minute (SLPM) in combination with 55 mm contact plates such as ICR/ICRplus contact plates or other small plate formats such as EM cassettes for the Growth Direct system, enabling efficient air sampling in Isolators and cleanrooms.

Supplier: Merck

Several EPA and ASTM methods require a polyurethane foam (PUF) cartridge for monitoring semi-volatiles in stack, ambient, indoor, and workplace atmospheres.

Supplier: Merck

The OSHA Versatile Sampler (OVS) is a unique tube design with the adsorbent and filter combined in one tube for collection of both vapors and aerosols.

Supplier: Bertin Instruments

Portable dry air sampler for bio contamination control.

Supplier: BURKLE

PharmaDispo disposable powder sampler is a multi-target sampler that takes three separate target point samples with a single sampling.