Block Heaters

Supplier: Thermo Orion

Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100, 120, 150, 160, 165 °C and four preset run times of 30, 60, 120 minutes or continuous time. Simply place 16 mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.

Supplier: Cole-Parmer

Safely maintain biological samples.

Supplier: Hach

Digital block heaters which can hold one or two heating blocks, units allow cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. Heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings.

Supplier: ASYNT

For controlled cooling of 25 to 1000 ml flasks without using jacketed reaction vessels. Units allow active temperature control from +150 to −30 °C (depending on circulator specification).

Supplier: ASYNT

The DrySyn® MAXI 2 L is a stand-alone 2000 ml version of the standard DrySyn MAXI Kit (which alternatively has a 3000 ml base and 2000 ml insert) which comes with heat resistant safety lifting handles.

Supplier: Hach

Block heater/cooler, Hach®, LT 20, Thermostatic block heater, bench-top, 80 % relative humidity, non-condensing, Temperature Range: 10...30 °C

Supplier: VELP SCIENTIFIC

Dedicated to COD (Chemical Oxygen Demand) analysis in environmental testing, ensuring accurate digestion of water and wastewater samples under controlled conditions.

Supplier: MACHEREY-NAGEL

Digestion of the sample is an important step in photometric water analysis.

Supplier: Hach

A digestion step often has to be carried out before key parameters can be determined. For these parameters, the LT 200 thermostat complements the LANGE cuvette test system. Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The LT 200 has a digital timer with an automatic switch-off and acoustic signal. Two transparent splash protection lids cover the thermostat while it is heating. The integrated over-temperature feature and the insulated external casing provide additional safety.

Supplier: BIOMETRA

Block heater block, Single block for TB2 thermoblock, For: 1,5 ml tubes, No. of Holes: 24