You searched for: Sterilisation Indicators
Changing appearances in color or pattern, the sterilization indicators visually show if cleaning conditions are passing or procedures have been completed. Eliminating any confusion or possibility instruments will not be sterile, indicators are used routinely in clinical and research environments where contamination elimination is crucial. With the temperature resistance required to endure the purification, the sterilization indicators are available in different forms such as tapes, ampoules, and sticks.
Rapid readout biological indicator for ethylene oxide sterilisation, 1294, Attest™
Supplier: 3M MEDICAL
Rapid readout biological indicator for EO (ethylene oxide) sterilization.
Expand 1 Items
Spore suspensions, Sportrol™
Supplier: CROSSTEX
Spore suspensions are pure suspensions of viable spores from specific organisms of known resistance to various sterilisation processes. These biological indicators are used to validate that bacterial spores have been completely destroyed. The indicator is simply processed with the load in the steriliser. No bacterial growth after culturing indicates that the sterilisation process is effective. Growth indicates ineffective sterilisation.
Expand 3 Items
Ethylene oxide chemical indicator strips 1251, Comply™
Supplier: 3M MEDICAL
The 3M™ Comply™ Steam Chemical Indicator 1251 is a paper strip 1,5 cm wide by 20 cm long printed with a chemical indicator ink that turns from red to green when exposed to the steam sterilisation process.
Expand 1 Items
Rapid readout biological indicator for EO 1294, Attest™
Supplier: 3M MEDICAL
Four-hour, green cap, Rapid Readout Biological Indicator for EO Sterilization . Biological indicators and test packs that monitor the effectiveness of the EO sterilisation process and provide results within four hours.
Expand 1 Items
Spore strips, Attest™
Supplier: 3M MEDICAL
Biological indicators provide the best assurance of sterility by challenging the steriliser with quantifiable, highly resistant spores. After sterilisation, the vial is 'crushed' to join the growth media with the processed spore strip. A colour change to yellow indicates surviving spores and a positive result. Biological indicators are used for load control monitoring which is the process by which a load is monitored and released based on the result of a biological indicator (BI) in a test pack.
Expand 2 Items
Chemical process indicators
Supplier: CROSSTEX
Chemical process indicators provide a fast and consistent visual check on items that were sterilised by EO.
Expand 3 Items
Spore strips, Sportrol™
Supplier: CROSSTEX
Biological sterilisation indicators are used to perform sterilisation cycle validation. They are created by inoculating spore suspensions of certified population and resistance onto paper strips.
Expand 7 Items
Spore strips, Attest™
Supplier: 3M MEDICAL
3M™ Attest™ Biological Monitoring Systems are true biological indicators, in self-contained indicator capsules. They enable checks on the biological reliability and performance of each steriliser without laboratory facilities and laboratory trained personnel.
Expand 2 Items
Comply Indicator Label
Supplier: 3M MEDICAL
The 3M Comply indicator tapes are an integral part of a coordinated sterilisation control system.
Expand 1 Items
EZTest® Biological Indicator
Supplier: BAG
Sterilisation indicator, EZTest steam G.stearothermophilus, 10⁶, Incubated for 24 Hrs at 57 °C
Expand 1 Items
MELAcontrol Pro for Stream Sterilizers
Supplier: MELAG Medizintechnik OHG
MELAcontrol Pro with 40 indicator strips is a durable, usable test body for the power-user.
Expand 1 Items
Self contained biological indicators (SCBI)
Supplier: CROSSTEX
Self-contained biological indicators (SCBIs) for monitoring steam sterilisation consist of a durable PC vial with cap, a crushable glass ampoule with Trypticase® soy broth (TSB) modified with pH indicator, and a disc inoculated with Geobacillus stearothermophilus spores.
Expand 2 Items
Electronic test system
Supplier: 3M MEDICAL
The Electronic Test System (ETS) is a stand alone test device for measurements of the physical parameters of a steam sterilisation cycle providing an accurate temperature, pressure and time measurement.
Expand 2 Items
Super Rapid Readout Steam Challenge Pack 1496VX, 3M™ Attest™
Supplier: 3M MEDICAL
Twenty four minute Biological Indicator Challenge Pack for 132°C (270°F) 4 minute and 135°C (275°F) 3 minute Dynamic Air Removal Steam Sterilization. Each pack contains one 3M™ Attest™ Super Rapid Readout Biological Indicator 1492V.
Expand 1 Items
Labels, indicator, for dry heat and depyrogenation
Supplier: CROSSTEX
CPI-DP1 are intended for use with individual units (e.g. packs, containers) to indicate that the unit has been directly exposed to a high temperature dry heat or depyrogentation process and to distinguish between processed and unprocessed units.
Expand 1 Items
Spore suspensions
Supplier: CROSSTEX
Sterilisation indicator, Spore Suspension, Sterilisation: Steam, Bacillus subtilis, cell line 5230: spore suspension (15 month shelf life), population 108/0,1 ml - steam sterilisation process
Expand 3 Items
Super rapid readout biological indicator 1492V, Attest™
Supplier: 3M MEDICAL
3M™ Attest™ Super rapid readout biological indicators and challenge packs for steam, super rapid 1-hour results.
Expand 1 Items
Biological indicators, spore threads
Supplier: CROSSTEX
Spore threads are prepared from Geobacillus stearothermophilus. These are designed to be placed directly into a device and utilised to monitor steam sterilisation process efficacy.
Expand 2 Items
Spore strips
Supplier: CROSSTEX
Sterilisation indicator, Spore Strips, Sterilisation: Steam, Geobacillus stearothermophilus cell line 7953: traditional spore strip 107 (24 month shelf life) / sterilisation process: steam, Length: 30, Width: 6 mm
Expand 4 Items
Spore Strip-Dual Species, Mesa Labs
Supplier: MESA LABORATORIES
Spore Strips consist of a paper spore strip inoculated with a sterilization-resistant spore population which are packaged in a glassine envelope. The glassine envelope serves as a microbial barrier which protects the spore strip from post sterilization contamination. Reduced incubation time available with appropriate conditions.
Expand 1 Items
Vaporised hydrogen peroxide tri-metric chemical indicator, Attest™
Supplier: 3M MEDICAL
The 3M™ Attest™ Vaporized Hydrogen Peroxide Tri-Metric Chemical Indicator 1348/1348E verifies that the stated values for the three critical parameters of exposure time, temperature, and amount of vaporized hydrogen peroxide have been achieved within a package or containment device (i.e. wrapped trays, rigid containers, sterilization pouches, and other types of packs) and/or at a specific location within the load or empty chamber.
Expand 1 Items
Comply™ Hydrogen Peroxide Chemical Indicator 1248
Supplier: 3M MEDICAL
Internal pack monitor for use with Vaporised Hydrogen Peroxide/Gas Plasma sterilisation processes.
Expand 1 Items
Biological indicators, traditional spore strips
Supplier: CROSSTEX
Bacillus subtilis strips for monitoring low temperature steam sterilisation processes.
Expand 1 Items
Spore discs, Sportrol™
Supplier: CROSSTEX
Biological sterilisation discs are used to perform sterilisation cycle validation in small areas of a device, where a standard-sized spore strip will not fit, such as within a syringe barrel, inside tubing, or under a cap. Spore discs are created by inoculating spore suspensions of certified population and resistance onto paper discs.
Expand 2 Items
Attest™ 390 Auto-Reader for Steam
Supplier: 3M MEDICAL
This auto-reader for steam, 390, is designed to incubate and automatically read the biological indicators for steam at 60 °C for a final fluorescent result.
Expand 1 Items
Autoclave test packs, Bowie and Dick type, Comply™
Supplier: 3M MEDICAL
With unique colour chemistry, the 3M™ Comply™ Disposable Bowie and Dick Type Autoclave Test Pack has been designed for single use in porous load sterilizers for daily Bowie and Dick tests.
Expand 1 Items
Biological indicators, spore coupons
Supplier: CROSSTEX
Spore coupons for use in monitoring plasma/vapourised hydrogen peroxide (VH₂O₂) sterilisation processes.
Expand 2 Items
Spore ampoules
Supplier: CROSSTEX
These spore ampoules are ideal for use in validation and routine monitoring of liquid steam sterilization cycles. Spore ampoules are manufactured using hermetically sealed Type I borosilicate glass containing an exclusively formulated Tryptic
Soy Broth (TSB) modified with pH indicator, and Geobacillus stearothermophilus spores. No activation is required; simply expose Spore Ampoules to sterilization process and incubate.
Expand 7 Items
Autoclave type test packs, bowie and dick type, Comply™
Supplier: 3M MEDICAL
The Bowie and Dick test is carried out daily in an empty chamber after a warm up cycle and is designed to show the adequacy of steam penetration.
Expand 1 Items
Mini spore discs
Supplier: CROSSTEX
Inoculated carrier mini spore discs for monitoring EO and dry heat processes.