You searched for: Seals

Supplier: VWR Collection

Polyester film with acrylic adhesive. These non pierceable films in sheeted-roll format are recommended for ELISA tests, general incubation and short-term storage.

Supplier: Trajan Scientific and Medical

Pure-Pass sealing mats protect wells from leaks, contamination and evaporation during sampling and storage.

Supplier: VWR Collection

Transparent polyester films with strong, non absorbing, non fluorescing, medical grade adhesive for superior performance in qPCR applications. Supplied non sterile.

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (24 wells), Single sheet/mat/strip, Capmat for J.T.Baker plate square well 24, Well top shape: Square, EVA, Transparent, Pierceable, Non sterile

Supplier: VWR Collection

These 77,5 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with cell culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: Bohlender

FEP. Sealing for flat flange with groove.

Supplier: Thermo Fisher Scientific

Made from polypropylene (PP).

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: VWR Collection

Aluminium foils, 75,7 µm thick, for use with 96 or 384 well plates. Fit inside the rim of raised rim plates. These foils have one partial width end tab. Available non sterile only.

Supplier: Avantor Fluid Handling

Ensure a tight seal in your sanitary fluid line.

Supplier: VWR Collection

These heat resistant 74,9 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For real-time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.

Supplier: VWR Collection

Easily pierceable 94,1 µm thick PE films with acrylic adhesive allow direct sample recovery with singe- or multi-channel pipettes and robotic probes.

Supplier: Thermo Fisher Scientific

These heat-shrink bands can be used to ensure the integrity of bottle contents. Simply apply the recommended application torque for Thermo Scientific Nalgene® closures and slide the heat-shrink band over the closure and bottle neck. Heat the band to shrink and secure contents with a tamper-resistant seal.

Supplier: Lenz Laborglas GmbH & CO.KG

PTFE, white.

Supplier: Thermo Fisher Scientific

Clear polyester film, aluminium foil. Recommended for use in PCR in conjunction with a thermal cycler that has a screw-down or clip-down lid.

Supplier: VWR Collection

These films are 240 µm thick black vinyl with adhesive for use with 96-well, 384-well and 1536-well black microplates. They fit within the edges of raised rim plates and may be applied to either the plate top or bottom. The light blocking and absorbing properties of these films make them ideal for reducing stray light and crosstalk in fluorescence applications and for protecting light-sensitive samples in storage.

Supplier: MULTIROIR

Security seal, Seals for attached lid container

Supplier: VWR Collection

A 139,7 µm thick hydrophobic porous film with medical grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packed in tamper evident bags of 25.

Supplier: Lenz Laborglas GmbH & CO.KG

Silicone or Silicone PTFE-coated.

Supplier: BURKLE

SampleSafe seals are made of PP and are uniquely identified by a 9-digit serial number.

Supplier: Cytiva (Formerly Pall Lab)

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Cap mat for incubation, Cap mat for incubation

Supplier: Thermo Fisher Scientific

Effective sealing of all microplate formats. For storage, PCR, microscopy, culture and protection.

Supplier: Lenz Laborglas GmbH & CO.KG

Silicone rubber sealing rings with PTFE washers.

Supplier: Avantor Fluid Handling

Ensure a better process seal with outstanding chemical resistance.

Supplier: Thermo Fisher Scientific

Round or square capped mats for sealing 96-well storage plates.

Supplier: THERMO MATRIX TECHNOLOGIES

SepraSeal® and DuraSeal® capping systems offer a pierceable, individual tube sealing solution. They are made from thermoplastic elastomer (TPE) with colorants and are DMSO resistant.

Supplier: THERMO MATRIX TECHNOLOGIES

Individual storage plate caps are designed for sealing storage plates and cluster tubes.

Supplier: CPC COLDER

O-Ring with Silicone, platinum-cured sealing options.

Supplier: AGILENT

Certified for use with the PlateLoc Thermal Microplate Sealer.