You searched for: Chromatography Columns

Supplier: Restek

These biphenyl coulmns have a greater degree of dispersion than conventional phenyls and a greater degree of polarisability than phenyl hexyls, creating higher selectivity and a greater range of usability. With heightened interactions shows substantial increases in retention for dipolar, unsaturated, or conjugated solutes and enhanced orthogonal selectivity when using methanol mobile phases.

Supplier: Restek

Application specific columns for organochlorine pesticides and herbicides.

Supplier: Restek

The Rt®-βDEXsp columns are useful in dual-column configurations, with the Rt-βDEXsm column, for complex enantiomeric separations.

Supplier: VICI JOUR RESEARCH

These PEEK columns are designed for naro-bore applications with small amount of samples.

Supplier: Restek

Column type: GC column, SilcoSmooth tubing, Ø int.: 2,00 mm, Length: 0,5 m, Ø ext.: 3,18 mm

Supplier: PerkinElmer

Spheri-5® is a small pore silica based sorbent for separating small molecules.

Supplier: Restek

These application-specific columns with proprietary crossbond phases are suitable for organochlorine pesticides and herbicides.

Supplier: Restek

Polar phase general-purpose columns, with Crossbond® Carbowax® polyethylene glycol provides oxidation resistance.

Supplier: Restek

Trident LC column protection system is available in three levels of protection such as filter only, cartridge only, or filter and cartridge.

Supplier: Restek

Pinnacle II PAH columns are developed specifically for challenging analyses of polycyclic aromatic hydrocarbons (PAHs).

Supplier: BUCHI

Column type: Flash/LPLC column, Silica, Flash cartridge, Reveleris®, Particle size: 40 µm, Bed weight: 4 g

Supplier: Restek

Rtx-DHA (fused silica) columns are crossbond with 100% dimethyl polysiloxane, which is optimised for hydrocarbon analysis.

Supplier: Restek

MXT®-1701 Siltek®-treated stainless steel columns are general purpose columns for alcohols, oxygenates, PCB congeners (e.g., Aroclor mixes), and pesticides.

Supplier: Restek

General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g., Aroclor mixes), essential oils, semivolatiles.

Supplier: Restek

General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g., Aroclor mixes), essential oils, semivolatiles.

Supplier: BEHR

Glass column with GL45 on both ends, GS 950, according to LUA bulletin no. 20, Ø int.: 60,00 mm, Length: 320 mm, Capacity: 950 ml

Supplier: Restek

These Siltek treated stainless steel tubing are the most durable high temperature GC columns. High temperature simulated distillation requires a column that can withstand temperatures to 430 °C.

Supplier: Restek

Rt-alumina BOND/Na₂SO₄ columns (fused silica PLOT) are used for Na₂SO₄ deactivation.

Supplier: UPCHURCH SCIENTIFIC

This narrow-bore short column (2,0×20 mm) creates only a slight pressure increase with virtually no detectable theoretical plate loss when used with a 3 mm int.Ø or larger column.

Supplier: Restek

Rt-Alumina BOND/KCl (fused silica PLOT) are used for KCl deactivation.

Supplier: Restek

Raptor™ ARC 18 columns are ideal for high-throughput LC-MS/MS applications with minimal sample preparation.

Supplier: Restek

These MXT-2887 columns stationary phase, column dimensions, and film thicknesses have been optimised to exceed the resolution and skewing factor requirements. Siltek-treated stainless steel tubing.

Supplier: Restek

When extreme pressure shocks and gas flow changes are anticipated there is a possibility for particles to dislodge. In those cases, using particle traps is recommended.

Supplier: Restek

Ultra Aqueous C18 is a rugged, reversed phase column with a well balanced retention profile that boasts high reproducibility and compatibility with many mobile phase, even in 100% aqueous conditions.

Supplier: Restek

Free-Turn architecture lets you change cartridges by hand without breaking inlet/outlet fluid connections, with no tools needed.

Supplier: Restek

Ultra amino columns are made of high-purity, spherical shaped type-B silica that minimises activity and creates high-density bonding. These columns are designed for selective and reliable HPLC applications. Aminopropylsilane provides reproducible retention and efficiency for normal-phase or HILIC analysis of simple sugars.

Supplier: Restek

Rxi®-5Sil MS stationary phase incorporates phenyl groups in the polymer backbone. This improves thermal stability, reduces bleed, and makes the phase less prone to oxidation. These columns are ideal for GC-MS applications requiring high sensitivity, including use in ion trap systems.

Supplier: Restek

These cartridges are manufactured using high density polypropylene and have polyethylene frits unless otherwise noted. Hydrophilic (polar) adsorbents used to extract hydrophilic analytes from nonpolar matrices, such as organic solvents (e.g., polar contaminants from sample extracts).

Supplier: WATERS

The Envirogel™ High-Resolution GPC cleanup columns are specifically designed to remove low volatility, high molecular weight interferences such as lipids and natural resins from environmental samples as specified in EPA method 3640A.

Supplier: WATERS

Atlantis HILIC silica columns are used in combination with high organic mobile phases (>80% acetonitrile) to provide retention of analytes that are simply too polar to be retained by reverse-phase chromatography.