Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1422A autoclave bags with drawstrings can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: THERMO BIOPROCESS DIVISION

The liners are designed to fit 'out-of-the-box'. It is applicable to all open- and closed-top mixing applications.

Supplier: RATIOLAB

Autoclavable PP bags for the disposal of contaminated labware.

Supplier: RATIOLAB

These disposable waste bags are made from strong PP film with a broad seam at the bottom. Intended for the sterilisation and disposal of hazardous and contaminated labware.

Supplier: RATIOLAB

Bags of very strong PP-film with a broad seam at the bottom, for the disposal of contaminated labware.

Supplier: INTERSCIENCE

These lateral filter bags are with non-woven filter that are ideal for the homogenisation and automatic filtration of the samples.

Supplier: INTERSCIENCE

BagPage® single use bags with filter membrane reduce analysis time thanks to their wide opening and markings showing where to introduce the pipette. Ideal for pasty products, cheese, flour and cakes. To use: Place the sample in the opened compartment (Fig. 1). Mix and then add reagents into the specially designed compartment (Fig. 2).

Supplier: Brady

These duffle bags are made of 600 denier polyester that are used for lock out kits.

Supplier: VWR Collection

LDPE Micronova BinLiners™ are ideal for the collection and disposal of waste, collection and transportation of parts or raw materials, and storage in cleanrooms and controlled environments. Thickness of 1 to 6 mm available for a variety of applications; including covering equipment, holding production waste, document storage, lining large production totes and so on.

Supplier: HEATHROW

These biohazard waste bags are for personal or general lab use, sizes to suit all needs.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1073B/HDPE autoclave continuous form tubing is ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps. Also a good choice for heavy equipment parts where visibility into the bag is required. Tubing form allows for the creation of bags of any length, giving excellent sizing flexibility.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Self-sealing Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges. No need to use or validate a heat sealing machine.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1422A autoclave bags with steam indicators can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Reduce the number of janitorial steam sterilisation loads by using gamma irradiated mop bucket liners. Instead of before every cleaning, the mop bucket system is typically autoclaved only once per week, but with each cleaning, a new sterile mop bucket liner pack is opened, the bucket is lined, and cleaning solution is added to it for cleaning.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Pre-sterilised and packaged in multiple layers of Tyvek peel pouches and poly bags to gain access into the aseptic area without excessive spraying and wiping with sanitisation agents. The bags are used for the removal and transport of media plates from the aseptic area to QC laboratories.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Self Sealing Heavy Duty SMS Autoclave Bags from Keystone Cleanroom Products are designed to satisfy the most stringent requirements in the sterilisation of critical pharmaceutical equipment and components.

Supplier: VWR Collection

Bucket liners create an impermeable barrier between the disinfectant and receptacle.

Supplier: Sampling Systems

PureBag for sealing powders or liquids.

Supplier: Thermo Fisher Scientific

Ideal for small lab items, botanical samples and other specimens. Not recommended for storing liquids. LDPE, 101 µm.

Supplier: KEYSTONE CLEANROOM PRODUCTS

These bags protects needles from accidental touching after they are removed from the primary sterilisation packaging.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Self-sealing Tyvek® 1422A autoclave bags with steam indicators can be used as either the inner, or outer bag for the steam sterilisation of pharmaceutical change parts.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Protect your filling needles from accidental touching after they are removed from the primary sterilisation packaging. Also creates secondary level of protection during aseptic presentation.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Eliminate the risk and expense of investigating the root causes of false positives with Keystone Cleanroom Products Sterile media plate transport and incubation bag system.

Supplier: MICRONOVA

These low density polyethylene Hazard BinLiner™ bags are designed for containing biomedical and hazardous waste in aseptic and controlled environments.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Easy-Tear Tyvek bags from Keystone Cleanroom Products are designed to satisfy the most stringent requirements in the sterilisation of critical pharmaceutical equipment and components.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Self-sealing 1073B Tyvek® are ideal for steam sterilization of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges. No need to use or validate a heat sealing machine.

Supplier: B. Braun

Urinocol® urine bags are PVC-free with protective film for better peeling and attachment by dividing the film possible and is latex-free with better adhesive properties for paediatric use.

Supplier: Sterilin

The bags in PP can withstand temperatures up to 134 °C.

Supplier: DEUTSCH NEUMANN

These are red natural rubber latex balloon suitable for rotary evaporators for mixing or collecting gas and for controlling air or gas flows at suitable equipment. It also features a tubing with length 140 mm and diameter 12 mm.