You searched for: Chromatography Spare Parts

Supplier: Agilent

A range of accessories and supplies for skimmer and sampling cones for use with our ICP-MS portfolio.

Supplier: VARIAN

Seal kits are available in various capacity based on the pump head sizes.

Supplier: VARIAN

Mark 7 Spray Chambers for flame atomisation System. Easy-to-use twist and lock assembly allows for easy cleaning and routine maintenance.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

MP-AES Sample Kits provide convenient kits for handling aqueous/acidic and organic samples. Select the appropriate one for your application.

Supplier: Agilent

These starter kits contain the most widely used capillary tubing, Swagelok connectors, and fittings in a variety of sizes.

Supplier: VARIAN

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Supplier: VARIAN

The Merlin Microseal is available in standard and high pressure kits.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-OES coils for complete confidence.

Supplier: Agilent

These performance maintenance kits for Dionex HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

Before ordering parts for FID maintenance, determine which type of FID is installed on your GC. The FID is available in two versions: Dedicated, capillary optimized: for capillary columns only. Adaptable: for packed or capillary columns.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Agilent

A range of high quality supplies and components for the Integrated Sample Introduction System (ISIS) for use with the 7700 ICP-MS range.

Supplier: Agilent

CrossLab piston seal, reversed-phase, For: Thermo UltiMate 3000 RS and SD pump series

Supplier: Agilent

A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: Agilent

These performance maintenance kits for Waters HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These torch injectors for PerkinElmer ICP-OES are available in a wide range of types. Choose from alumina or quartz in a range of sizes and acid resistance.

Supplier: Agilent

In 2005, Agilent released an improved FPD with minimum detectable levels (MDL) of 3,6 pg/s for sulphur and 60 fg/s for phosphorus. This is more than a five times improvement for sulphur.

Supplier: Agilent

These nebulisers for PerkinElmer AA systems provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Supplier: Agilent

Intuvo Flow Chips are modular, microfluidic components that create connections between the inlet, column, and detector(s) without the need for ferrules, and can be easily swapped in minutes.

Supplier: Agilent

The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

The HSDC is comprised of a fused silica cell body and removable capillaries. The light path through the cell is made from black fused silica which significantly minimizes stray light and defines the aperture for the diode-array spectrometer.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: VARIAN

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.

Supplier: Agilent

Inert kit for ICP-MS enables analysis of high-purity and HF-containing samples using a PFA-based sample intro system with inert Pt or sapphire-injector torch.

Supplier: Agilent

High quality off-axis design ion lenses separate ions from photons and residual neutral material resulting in lower background noise in 7700/8800 ICP-MS systems.