Purchase a wide range of chromatography supplies at Avantor, including SPME fiber assemblies, inlet liners - SPME-GC,iInlet liners - FocusLiner, column mounting bracket and other products.
Injection port liners, Uniliner®
Supplier: Restek
Liners are used for conversion of ¼" packed injection port.
Expand 21 Items
Carriage motor belt
Supplier: Restek
Carriage motor belt for Agilent 7673A, 7673B and 7673C autosamplers.
Expand 1 Items
FID capillary column adapters
Supplier: Restek
These FID capillary column adapters made of stainless steel are ideal for PerkinElmer Auto SYS XL.
Expand 2 Items
Methane cylinder kit for GC
Supplier: Restek
Set the column flow rate by injection the methane and optimising linear velocity is preferred method for establishing reproducible retention times.
Expand 1 Items
Trident direct guard cartridge system
Supplier: Restek
Trident direct system can be used to select the right level of protection for analysis. It provides the protection against particulate matter and moderate protection against irreversibly adsorbed compounds.
Expand 5 Items
Installation kits for micropacked columns
Supplier: Restek
Installation kit for 1 mm ID columns; for direct injections, Kit contains 2× stainless steel nuts 1,58 mm, 2× Vespel/graphite ferrules 1,58 mm, 2× graphite ferrules 1,58 mm, 2× stainless steel front ferrules 1,58 mm, 2× stainless steel back ferrules 1,58 mm
Expand 2 Items
Inlet maintenance kit
Supplier: Restek
Inlet maintenance kit for use with Agilent GCs.
Expand 1 Items
Pulse dampener, UHP
Supplier: Restek
The UHP pulse dampener made up of stainless steel fluid path.
Expand 1 Items
Inlet liners for Agilent GCs
Supplier: Restek
Inlet liners with deactivation improve trace-level analysis that are suitable for agilent GCs equipped with split/splitless inlets. It is made of borosilicate glass.
Expand 79 Items
HPLC maintenance kits
Supplier: Restek
These kits are used for start-up and maintenance in all HPLC systems.
Expand 4 Items
Inlet liners for Thermo Scientific GCs
Supplier: Restek
Use these liners for increased sensitivity. They are manufactured from borosilicate glass or metal.
Expand 70 Items
Direct injection liners, Uniliner®
Supplier: Restek
Direct injection Uniliner® liners minimise solvent and peak tailing. These are suitable for 6,35 mm packed column injection ports.
Expand 3 Items
Replacement parts for Shimadzu HPLC systems
Supplier: Restek
Replacement parts for Shimadzu HPLC systems.
Expand 2 Items
Maintenance kits for LC-MS Nitrogen generators
Supplier: DOMNICK HUNTER
Maintenance kit 4000 hours for all LC-MS
Expand 2 Items
Liner adaptors, Uniliner®
Supplier: Restek
Uniliner® liners must be used with a Uniliner® liner adaptor for ¹/₄" injection ports.
Expand 4 Items
Capillary column rinsing reservoir kit
Supplier: Restek
This reservoir kit is used to restore the performance of bonded-phase capillary columns by dissolving and removing soluble, nonvolatile residue. The rinsing reservoir is equipped with 6,4 mm inlet and outlet connections and includes a built-in fritted disk to prevent particulate matter from contaminating the column.
Expand 2 Items
Packed column inlet adapter kits
Supplier: Restek
Packed column inlet adapter kits center columns perfectly in 6,35 mm injection ports to eliminate bent syringe needles.
Expand 2 Items
Injector adapters
Supplier: Restek
These injector adapters made of stainless steel are ideal for PerkinElmer CAP injector.
Expand 3 Items
Inlet liners
Supplier: Restek
These liners are made up of borosilicate glass and intermediate polarity deactivated.
Expand 9 Items
Heater cartridge and platinum resistance thermometer (PRT) sensor for Agilent 5890 GCs
Supplier: Restek
This heater cartridge and PRT sensor can be used with 5890 FID and split/splitless weldments.
Expand 3 Items
Plunger assembly for Shimadzu HPLC systems
Supplier: Restek
Replacement parts for Shimadzu HPLC systems.
Expand 2 Items
ECD/FID make-up gas kit
Supplier: Restek
This kit is used exclusively with Agilent 5890 GCs.
Expand 6 Items
Split/splitless injection port, EZ Twist Top®
Supplier: Restek
This split/splitless injection port changes inlet liners faster and more easily.
Expand 1 Items
Sample loops for Valco valves
Supplier: VICI JOUR RESEARCH
These sample loops are made from PEEK tubing and fittings. Mechanically strong, chemically inert polymer ideal for HPLC applications. Softener-free polyethylene caps are used to avoid contamination of the tubing.
Expand 8 Items
Sample loops for Cheminert® valves, stainless steel
Supplier: VICI JOUR RESEARCH
These VICI Jour sample loops are made of high quality stainless steel 316.
Expand 8 Items
Extraction cell caps and replacement parts
Supplier: Restek
Caps features a smooth inner surfaces for easier cleaning. Suitable for for ASE systems.
Expand 8 Items
Sample loops for high pressure valves, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These PEEK sample loops are metal-free alternatives to stainless steel loops. PEEK loop ends are provided with clean, straight cuts for easy valve installation.
Expand 4 Items
Preventive maintenance (PM) kits
Supplier: Restek
These preventive maintenance (PM) kits are suitable for Waters HPLC and ACQUITY UPLC Systems.
Expand 8 Items
Septum packed purge port weldment, Siltek®
Supplier: Restek
This Siltek® treated septum packed purge port weldment for Agilent 5890 GC makes weldment inert and eliminates adsorption of sensitive compounds such as, DDT and Endrin.