You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
Elemental analysis standards, PTP sample of oils, VHG
Supplier: LGC Standards PROMOCHEM
The PTP has been specially designed for analytical laboratories that analyse new and used oils for metals, sulphur, viscosity and particle count.
Expand 1 Items
Gasoline surrogate and internal standards, VOA Mixes
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 6 Items
Reference materials, metals in biodiesel Standard, VHG
Supplier: LGC Standards PROMOCHEM
This solution is intended for use as a calibration or reference standard for the analysis of these analytes in biodiesel or related organic matrices according to ASTM D6751. Sulfur is present in the raw materials and is not certified.
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
Residual Solvents Class 2 - Mix B (8 components)
Supplier: Restek
The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).
Expand 1 Items
MA VPH matrix spike mix with surrogate rev. 1.1 (July 2004) (16 components)
Supplier: Restek
The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.
Expand 1 Items
Fuel oil degradation mix (4 components)
Supplier: Restek
Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.
Expand 1 Items
Fuel Oil #4 Standards (ASTM D-445)
Supplier: Restek
Fuel oil #4 is typically used in limited applications in which the fuel cannot be preheated prior to burning. The fuel is a blend of distillate (fuel oil #2) and residual (fuel oil #6).
Expand 2 Items
PA DEP UST standard (11 components)
Supplier: Restek
Standard contains benzene, 1,2-dibromoethane (EDB), 1,2-dichloroethane, ethylbenzene (100-41-4), isopropyl benzene (cumene), methyl tert-butyl ether (MTBE), naphthalene, toluene, m-xylene, o-xylene, p-xylene.
Expand 1 Items
MA VPH standard with surrogate
Supplier: Restek
The MA VPH standard consists of 14 components they are (C5) n-pentane 1000 μg/ml, (C9) n-nonane 1000 μg/ml, benzene 500 μg/ml, 2,5-dibromotoluene (SS) 1000 μg/ml, ethylbenzene 500 μg/ml, 2-methylpentane 1500 μg/ml, methyl tert-butyl ether (MTBE) 1500 μg/ml, naphthalene 1000 μg/ml, toluene 1500 μg/ml, 1,2,4-trimethylbenzene 1000 μg/ml, 2,2,4-trimethylpentane (isooctane) 1500 μg/ml, m-xylene 1,000 μg/ml, o-xylene 1,000 μg/ml and p-xylene 1,000 μg/ml.
Expand 1 Items
Coal fly ash - crace and constituent elements
Supplier: LGC Standards PROMOCHEM
This reference standard is intended for use in the evaluation of analytical methods for the determination of constituent elements in coal fly ash and materials of similar matrix. These are bituminous coal fly ash, sieved through a nominal sieve opening of 74 µm (200 mesh) and then blended to assure homogeneity.
Expand 1 Items
Reference materials, diesel fuel dilution Standards, VHG
Supplier: LGC Standards PROMOCHEM
These standards are intended for use in the determination of fuel (diesel fuel or gasoline) in used engine oils by GC, IR, fuel dilution meter (fuel sniffer), or flash point analyser. They are prepared gravimetrically from well-characterised fuels and hydrocarbon oils, and are verified by GC-FID in accordance with ASTM Method D3524 or D3525.
Expand 2 Items
WA EPH fractionation check mix (22 components)
Supplier: Restek
The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.
Expand 1 Items
Alaska UST method AK101AA
Supplier: Restek
The alaska UST method consists of 14 components they are benzene, ethylbenzene, 1-ethyl-2-methylbenzene, 1-ethyl-3-methylbenzene, 1-ethyl-4-methylbenzene, isopropylbenzene (cumene), n-propylbenzene, toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.
Expand 1 Items
Calibration mix D2887 (17 components)
Supplier: Restek
D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.