You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
ASTM® D3606 calibration standard #1 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (5% vol/vol), toluene (20% vol/vol).
Expand 1 Items
Reference materials, cloud point reference, VHG
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.
Expand 1 Items
Aviation gas standard
Supplier: Restek
100-octane, low-lead fuel used in piston-type aircraft.
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
Reference materials, base number standards, in hydrocarbon oil
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in the determination of base number (AN) in petroleum products in accordance with ASTM D2896/IP 276 (by potentiometric perchloric acid titration) or ASTM D4739 (by potentiometric titration).
Expand 13 Items
ASTM D3606 calibration standard #4 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
DRO/ORO calibration standard
Supplier: Restek
This consists of 10W30 motor oil:diesel fuel #2 (1:1 blend).
Expand 1 Items
Reference materials, acid number standards, in hydrocarbon oil, VHG
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).
Expand 4 Items
Residual range calibration standard (RCS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
MA VPH surrogate standard (2,5-dibromotoluene)
Supplier: Restek
2,5-Dibromotoluene, 10000 µg/ml in P and T methanol, Pk Info: 1 ml/ampoule
Expand 1 Items
Method 1664 oil and grease mix (2 components)
Supplier: Restek
Contains two components, those are n-hexadecane and stearic acid.
Expand 1 Items
MA VPH standard with surrogate rev. 1.1 (July 2004) (16 components)
Supplier: Restek
The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene, ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.
Expand 1 Items
Reference materials, acid number standards, total acid number (TAN)
Supplier: LGC Standards PROMOCHEM
Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).
Expand 3 Items
Diesel #2/mineral oil (2 components)
Supplier: Restek
The mix consists of diesel fuel #2 composite, mineral oil.
Expand 1 Items
ASTM D3606 calibration standards with MEK internal standards
Supplier: Restek
ASTM D3606 calibration standard #7 with MEK internal standard, isooctane includes benzene, 0,0576%, 2-butanone, 4%, toluene 0,48%, Pk Info: 1 ml/ampoule
Expand 7 Items
Gasoline component standard, 10 components
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.
Expand 1 Items
Weathered diesel fuel #2 kit
Supplier: Restek
The kit consists of different standards.
Expand 1 Items
Motor oil composite standard
Supplier: Restek
Motor oil composite, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
JP-8 military fuel standard
Supplier: Restek
JP-8 military fuel standard, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
ASTM D3606 calibration standard #7 without internal standard (2 components)
Supplier: Restek
Contains two components, those are benzene and toluene.
Expand 1 Items
ASTM D3606 calibration standard #6 without internal standard (2 components)
Supplier: Restek
Contains two components, those are benzene and toluene.
Expand 1 Items
ASTM® D3606 calibration standard #1 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
Kerosene (ASTM Class 4 accelerant)
Supplier: Restek
These solutions are prepared from a single-source (one-refinery) product.
Expand 4 Items
ASTM D3606 calibration standard #3 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (1,25% vol/vol), toluene (10% vol/vol).
Expand 1 Items
DRO mix (Tennessee/Mississippi) (16 components)
Supplier: Restek
DRO mix (Tennessee/Mississippi), 1000 μg/ml each in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
CA WIP VOA standard (11 components)
Supplier: Restek
For monitoring samples suspected of gasoline contamination requires laboratories to calibrate and report these compounds.
Expand 1 Items
Extraction retention time standard, (4 components)
Supplier: Restek
This contains n-hexane (C6), n-decane (C10), n-docosane (C22) and n-dotriacontane (C32).
Expand 1 Items
Gasoline fuel dilution standards, VHG
Supplier: LGC Standards PROMOCHEM
This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.
Expand 1 Items
ASTM D2887-12 calibration standard (20 components)
Supplier: Restek
Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.
Expand 1 Items
Unleaded gasoline composite standards for UST monitoring
Supplier: Restek
Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.
Expand 7 Items
Sulphur simulated distillation standard (SSDS)
Supplier: Restek
The standard consists of ethanethiol, 1-propanethiol, 1-butanethiol, 1-pentanethiol, 1-hexanethiol, 1-heptanethiol, 3,5-dimethylbenzenethiol, 1-octanethiol, 1-nonanethiol, 1-decanethiol, 1-pentadecanethiolol, 1-hexadecanethiol and 1-octadecanethiol.