You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
Aniline point standards, ASTM D 611, Supelco®
Supplier: Merck
Aniline point standard, Supelco®, ASTM D 610
Expand 2 Items
FIA aromatics standards, ASTM D 1319, Supelco®
Supplier: Merck
Fuels Testing Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for hydrocarbon types in liquid petroleum products by fluorescent indicator adsorption ASTM D1319.
Expand 1 Items
Petrochemical standard, bio diesel fuel, Dr. Ehrenstorfer
Supplier: EHRENSTORFER
Bio diesel fuel, Reference standard
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
Petroleum standard, regular unleaded gasoline 10000 µg/ml in methanol, with certified content of BTEX, Dr. Ehrenstorfer
Supplier: EHRENSTORFER
Regular unleaded gasoline, 10000 µg/ml in methanol, with certified content of BTEX, Reference standard
Expand 1 Items
Trace Elements in Fuel Oil
Supplier: Merck
Trace elements in fuel oil, Flash point: 61 °C
Expand 1 Items
Supelco® Cloud point standards
Supplier: Merck
Cloud point standard, Supelco®, ASTM D 2500; NF EN23015
Expand 2 Items
Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether
Supplier: REAGECON
Gasoline calibration standard (two compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS.
Expand 1 Items
Pour point standards, Supelco®
Supplier: Merck
Pour point standard, Supelco®, IP15, ASTM D97, ISO 3016, BS 2000, Pt 15
Expand 2 Items
Distillation Standards, Supelco®
Supplier: Merck
Distillation Certified Reference Material for the calibration and verification of laboratory instruments used in testing petroleum and derivative products for Distillation ASTM D86 and ISO 3405.
Expand 3 Items
Petrochemical standard, regular diesel fuel 2500 µg/ml in methanol, Dr. Ehrenstorfer
Supplier: EHRENSTORFER
Regular diesel fuel, 2500 µg/ml in methanol, Reference standard
Expand 1 Items
Flash point standards, Cleveland open cup, ASTM D 92, Supelco®
Supplier: Merck
These UKAS certified standards are specifically designed to be used for regular instrument performance checks.
Expand 5 Items
Smoke point standard ASTM D 1322 / IP 57Supelco®
Supplier: Merck
Smoke point standard, Supelco®, 24.25 mm, ASTM D 1322; IP 57
Expand 1 Items
Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether
Supplier: REAGECON
Gasoline calibration standard (three compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. This product is prepared gravimetrically on a weight/volume basis to a specification of ±2.5%
Expand 1 Items
Flash point standards, Pensky Martens closed cup, ASTM D 93, Supelco®
Supplier: Merck
Procedure A is applicable to distillate fuels - diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and lubricating oils. These UKAS certified standards are specifically designed to be used for regular instrument performance checks.
Expand 6 Items
Calibration gas cylinders
Supplier: M S A
The gas mixture in calibration gas cylinder is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.
Expand 1 Items
Petroleum standards, polywax
Supplier: Restek
These high molecular weight hydrocarbon waxes are useful for simulated distillation and other high temperature GC work.
Expand 3 Items
Fuel oil - trace elements, NIST-1634C reference material
Supplier: LGC Standards PROMOCHEM
NIST-1634C standard, fuel oil- trace elements
Expand 1 Items
Oil analysis standards, phosphorus in 20 blank oil, CONOSTAN®
Supplier: LGC Standards PROMOCHEM
Phosphorus in 20 blank oil, 1000 µg/g
Expand 1 Items
Hydraulic oil standard
Supplier: Restek
This is for total petroleum hydrocarbon pattern recognition of hydraulic oil.
Expand 1 Items
Cloud Point Standard, ASTM D2500 and ISO 3015 (Diesel) (PPCPD)
Supplier: CUSTOM MADE CHEMICALS LAB
Cloud point standard, Flash point: 62,5 °C, ASTM D2500, ISO3015
Expand 1 Items
Diesel surrogate and internal standards
Supplier: Restek
o-terphenyl, 2000 μg/ml in acetone, 1 ml/ampule, for internal standard
Expand 5 Items
Calcinated petroleum coke - trace elements
Supplier: LGC Standards PROMOCHEM
This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.
Expand 1 Items
JP-5 military fuel standard
Supplier: Restek
JP-5 military fuel, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
ASTM D3606 calibration standard #2 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
ASTM® D3606 calibration standard #5 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
Flash point tester reference materials
Supplier: STANHOPE SETA
Flash Check, secondary verification material
Expand 1 Items
Biodiesel blank, VHG
Supplier: LGC Standards PROMOCHEM
This solution for using as calibration blank for biodiesel metals and sulphur analysis.
Expand 2 Items
DHA Naphthenes standard (26 components)
Supplier: Restek
This naphthenes standard is produced for refineries performing detailed hydrocarbon analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
Petrochemical standards, sulphur in isooctane
Supplier: LGC Standards PROMOCHEM
These standards are designed for analysis of sulphur and chlorine in a wide variety of petroleum products by XRF, ICP and other analytical techniques.