Safety waste caps consistently trap vapors and liquids in safety cans and containers when storing or disposing hazardous material. The closures keep solvents clean while protecting handlers with leak-proof tight seals. Chemically resistant for even the most corrosive materials, the high-quality cap construction complies with safety codes and regulations for the work place. The strong carbon filters give maximum vapor protection and closures featuring automatic shut-off or funnels make overflow filling or dumping spills impossible.
b.safe Cap GL 45 UHPLC
Supplier: Bohlender
Screw cap made of PPS for GL 45 thread, free movable insert made of PTFE.
Expand 1 Items
b.safe Waste cap electronic fill-level control
Supplier: Bohlender
To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.
Expand 12 Items
System caps GL 45, b.safe
Supplier: Bohlender
Screw cap made of PPS for free movable GL 45 thread, insert made of PTFE. With PFA fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¼"), hose connector for tubings Int.Ø 6,5 to 8 mm (thread NPT ¹/₈"). Adapted to the installation on b.safe Desktop Mounts GL 45 or b.safe Multiports GL 45.
Expand 7 Items
System waste caps DLC, b.safe
Supplier: Bohlender
b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.
Expand 4 Items
Combi-pack caps and seal for Transferpettor™
Supplier: Brand
PP caps, PE seal, DE-M marking.
Expand 4 Items
Membrane caps for polarographic Dissolved Oxygen probes, Orion™
Supplier: Thermo Orion
These membrane caps help to reduce probe servicing time and eliminate assembly problems. Convenient screw-on membrane caps help ensure optimal probe performance.
Expand 2 Items
Transfer cap PYREX®
Supplier: Corning
Transfer cap for optimum growth with with ¹/₄" Barb connection.
Expand 1 Items
Tamper-evident closure for compact jerrycan
Supplier: BURKLE
Screw-on closure with tamper-evident ring for compact jerrycan.
Expand 1 Items
Sterile transfer caps for Erlenmeyer flasks, Corning®
Supplier: Corning
Transfer caps with two ports. One port ends in a 50 mm, 0,2 μm filter disc and the other port is C-Flex Tubing ending in either a male Luer lock or a male polycarbonate quick connect.
Expand 6 Items
Spout PROFI with wide thread
Supplier: hünersdorff GmbH
Made of fracture-proof and food-safe polyethylene with sleeve connection for a hose.
Expand 2 Items
InfinityLab Stay safe caps
Supplier: Agilent
InfinityLab Stay Safe caps stop evaporation of harmful solvent vapors from solvent bottles.
Expand 5 Items
Safety caps
Supplier: Agilent
These safety caps have been designed for optimal sealing with an integrated exhaust valve providing pressurisation during solvent extraction and allowing proper solvent flow to your HPLC system.
Expand 1 Items
Waste caps
Supplier: VICI JOUR RESEARCH
These waste caps include three or four ports for ¹/₈ and ¹/₁₆" tubing. Two versions of each waste cap are available, with an extra port to accommodate either a 1/2-20 port for ¹/₄" O.Ø tubing, or a barbed hose adapter.
Expand 13 Items
Eco caps
Supplier: VICI JOUR RESEARCH
The Eco Cap consists of a three-hole ETFE insert with a polyethylene collar.
Expand 4 Items
Zero pressure weather caps
Supplier: LABCONCO
Weathercaps are constructed of strong, corrosion-resistant PVC.
Expand 3 Items
Safety caps, DIN 50 threads
Supplier: VICI JOUR RESEARCH
DIN50 safety caps seal to the bottle/canister with an O-ring behind a PTFE lip, so the O-ring is therefore not a wetted part. Unused ports can be closed with the stopcock.
Expand 1 Items
Caps
Supplier: VICI JOUR RESEARCH
These caps top bottles are available with two, three, or four colour-coded 1/4-28 thread for ¹/₈ or ¹/₁₆" O.Ø tubing.
Expand 18 Items
Safety caps, GL 45 threads
Supplier: VICI JOUR RESEARCH
GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.
Expand 9 Items
Safety cap
Supplier: VICI JOUR RESEARCH
This cap can be used for helium sparging and for delivering HPLC mobile phases. The tubing ports are made so that you push the tubing through the hole, while 1/4-28 fittings provide the best connection. Unused ports can be plugged as required.